The tablet has a vibrator motor. This patch series exposes it via
input subsystem (EV_FF).
I'd like to ask input maintainers to take the patches 1 and 2.
Patches 3 and 4 should go via the sunxi tree.
The change to the vibrator driver is meant to enable toggling the
vibrator motor just via a power supply itself. There's not additional
gpio driven switch on this tablet between the power supply for the
motor and the motor.
Please take a look.
Changes in v3:
- Changed dt-binding to require at least one of enable/supply, dropped ack
- Changed driver to bail out if neither supply nor gpio is given
Changes in v2:
- Added DT ack tag
- Add more information to the commit log (re use of LDO for the power)
thank you and regards,
Ondrej Jirman
Ondrej Jirman (4):
dt-bindings: input: gpio-vibrator: Don't require enable-gpios
input: gpio-vibra: Allow to use vcc-supply alone to control the
vibrator
ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator
.../devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++-
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 9 +++++++--
drivers/input/misc/gpio-vibra.c | 14 ++++++++++----
3 files changed, 23 insertions(+), 7 deletions(-)
--
2.27.0
