Hi Dmitry,
On Mon, Jun 22, 2020 at 1:06 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> Port thermal zones definitions from msm-4.19 tree. Enable and add
> channel configuration to PMIC's ADC-TM definitions. Declare thermal
> zones and respective trip points.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 237 ++++++++++++++++++++++++
> 1 file changed, 237 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
IMO, this should be separated in the pmic dts file like we do for
other QC platforms since the PMICs tend to be used in multiple
platforms.
> index aa37eb112d85..78f0cf582a9a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> @@ -24,6 +24,104 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + thermal-zones {
> + xo-therm {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pm8150_adc_tm 0>;
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
