Hi,
On Tue, 30 Jun 2020 at 08:06, Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx> wrote:
> On Mon, Jun 22, 2020 at 1:06 AM Dmitry Baryshkov
> <dmitry.baryshkov@xxxxxxxxxx> wrote:
> >
> > Port thermal zones definitions from msm-4.19 tree. Enable and add
> > channel configuration to PMIC's ADC-TM definitions. Declare thermal
> > zones and respective trip points.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 237 ++++++++++++++++++++++++
> > 1 file changed, 237 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
>
> IMO, this should be separated in the pmic dts file like we do for
> other QC platforms since the PMICs tend to be used in multiple
> platforms.
Unlike other PMIC/tsens thermal zones, these definitions are quite
specific to the board from my point of view.
> > index aa37eb112d85..78f0cf582a9a 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
> > @@ -24,6 +24,104 @@ chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> > + thermal-zones {
> > + xo-therm {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > + thermal-sensors = <&pm8150_adc_tm 0>;
> > + trips {
> > + active-config0 {
> > + temperature = <125000>;
> > + hysteresis = <1000>;
> > + type = "passive";
> > + };
> > + };
> > + };
> > +
--
With best wishes
Dmitry
