Enable the second UART interface used on this board.
Also convert the DT to use phandles instead of addresses
to make it coherent with other device trees.
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 50 ++++++++++---------
1 file changed, 26 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 9ba359c848d0..de06fa809488 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -99,38 +99,40 @@ removed_region@85800000 {
no-map;
};
};
+};
- soc {
- sdhci@c0c4000 {
- status = "okay";
+&blsp_i2c1 {
+ status = "okay";
- mmc-ddr-1_8v;
- /* SoMC Nile platform's eMMC doesn't support HS200 mode */
- mmc-hs400-1_8v;
- };
+ /* Synaptics touchscreen */
+};
- i2c@c175000 {
- status = "okay";
+&blsp_i2c2 {
+ status = "okay";
- /* Synaptics touchscreen */
- };
+ /* SMB1351 charger */
+};
- i2c@c176000 {
- status = "okay";
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
- /* SMB1351 charger */
- };
+&blsp_i2c6 {
+ status = "okay";
- serial@c1af000 {
- status = "okay";
- };
+ /* NXP NFC */
+};
- /* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+&blsp1_uart2 {
+ status = "okay";
+};
- i2c@c1b6000 {
- status = "okay";
+&blsp2_uart1 {
+ status = "okay";
+};
- /* NXP NFC */
- };
- };
+&sdhc_1 {
+ status = "okay";
+
+ mmc-ddr-1_8v;
+ /* SoMC Nile platform's eMMC doesn't support HS200 mode */
+ mmc-hs400-1_8v;
};
--
2.27.0
