[PATCH 3/8] arm64: dts: qcom: sdm630: Add tsens node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable tsens on this SoC using tsens-v2 driver.

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml       |  1 +
 arch/arm64/boot/dts/qcom/sdm630.dtsi                  | 11 +++++++++++
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d7be931b42d2..d89d5acd6e2a 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sc7180-tsens
+              - qcom,sdm630-tsens
               - qcom,sdm845-tsens
           - const: qcom,tsens-v2
 
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ea85f28032d2..92bf4ae6a590 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -566,6 +566,17 @@ anoc2_smmu: iommu@16c0000 {
 				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x01f40000 0x20000>;
-- 
2.27.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux