Hi, the first patch in this series is a small but significant variation in how the lp87565 driver enables the output rails, to allow the kernel to always know when it is enabling an output. However it can change existing behaviour (depending on the hardware setup) and thus it should be carefully evaluated. The following patches are a fairly straightforward addition of a new chip variant along DT bindings conversion to yaml. v3 fixes the yaml errors present in v2. RFC,v1: https://lkml.org/lkml/2020/6/3/908 v2: https://lkml.org/lkml/2020/6/17/492 Luca Luca Ceresoli (4): regulator: lp87565: enable voltage regardless of ENx pin dt-bindings: mfd: lp87565: convert to yaml dt-bindings: mfd: lp87565: add LP87524-Q1 variant mfd: lp87565: add LP87524-Q1 variant .../devicetree/bindings/mfd/lp87565.txt | 79 ------ .../devicetree/bindings/mfd/ti,lp875xx.yaml | 225 ++++++++++++++++++ drivers/mfd/lp87565.c | 4 + drivers/regulator/lp87565-regulator.c | 21 +- include/linux/mfd/lp87565.h | 1 + 5 files changed, 249 insertions(+), 81 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/lp87565.txt create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml -- 2.27.0
