From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
The phy-supply property is often added to MAC nodes but this is wrong
conceptually. These supplies should be part of the PHY node on the
MDIO bus. Add phy-supply property at PHY level to mdio.yaml.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/mdio.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index d6a3bf8550eb..9c10012c2093 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -90,6 +90,10 @@ patternProperties:
Delay after the reset was deasserted in microseconds. If
this property is missing the delay will be skipped.
+ phy-supply:
+ description:
+ Phandle to the regulator that provides the supply voltage to the PHY.
+
required:
- reg
--
2.26.1
