pon., 22 cze 2020 o 15:25 Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> napisał(a): > > On Mon, Jun 22, 2020 at 11:37:42AM +0200, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> > > > > Currently many MAC drivers control the regulator supplying the PHY but > > this is conceptually wrong. The regulator should be defined as a property > > of the PHY node on the MDIO bus and controlled by the MDIO sub-system. > > > > Add support for an optional PHY regulator which will be enabled before > > optional deasserting of the reset signal. > > I wonder if this is the right place for this - MDIO devices do not have > to be PHYs - they can be switches, and using "phy-supply" for a switch > doesn't seem logical. > > However, I can see the utility of having having a supply provided for > all mdio devices, so it seems to me to be a naming issue. Andrew? > I followed the example of the phy reset retrieved in mdiobus_register_reset(). I'm happy to change it to some other name. Bart
