On Wed, 2020-06-17 at 11:34 +0200, Matthias Brugger wrote:
>
> On 17/06/2020 05:00, Chao Hao wrote:
> > Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
> > In order to improve performance, we always disable STANDARD_AXI_MODE
> > and IN_ORDER_WR_EN in MISC_CTRL.
> >
> > Change since v3:
>
> The changelog should go below the '---' as we don't want this in the git history
> once the patch get's accepted.
>
okok, thanks
> > 1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
> > 2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
> > We need to disable in_order_write to improve performance
> >
> > Cc: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
> > ---
> > drivers/iommu/mtk_iommu.c | 11 +++++++++++
> > drivers/iommu/mtk_iommu.h | 1 +
> > 2 files changed, 12 insertions(+)
> >
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 88d3df5b91c2..239d2cdbbc9f 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -42,6 +42,9 @@
> > #define F_INVLD_EN1 BIT(1)
> >
> > #define REG_MMU_MISC_CTRL 0x048
> > +#define F_MMU_IN_ORDER_WR_EN (BIT(1) | BIT(17))
> > +#define F_MMU_STANDARD_AXI_MODE_BIT (BIT(3) | BIT(19))
> > +
> > #define REG_MMU_DCM_DIS 0x050
> >
> > #define REG_MMU_CTRL_REG 0x110
> > @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> > writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> > }
> >
> > + if (data->plat_data->has_misc_ctrl) {
>
> That's confusing. We renamed the register to misc_ctrl, but it's present in all
> SoCs. We should find a better name for this flag to describe what the hardware
> supports.
>
ok, thanks for you advice, I will rename it in next version.
ex:has_perf_req(has performance requirement)
> Regards,
> Matthias
>
> > + /* For mm_iommu, it can improve performance by the setting */
> > + regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> > + regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> > + regval &= ~F_MMU_IN_ORDER_WR_EN;
> > + writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> > + }
> > +
> > if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> > dev_name(data->dev), (void *)data)) {
> > writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index 1b6ea839b92c..d711ac630037 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
> >
> > /* HW will use the EMI clock if there isn't the "bclk". */
> > bool has_bclk;
> > + bool has_misc_ctrl;
> > bool has_vld_pa_rng;
> > bool reset_axi;
> > unsigned char larbid_remap[MTK_LARB_NR_MAX];
> >
