Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
In order to improve performance, we always disable STANDARD_AXI_MODE
and IN_ORDER_WR_EN in MISC_CTRL.
Change since v3:
1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
We need to disable in_order_write to improve performance
Cc: Yong Wu <yong.wu@xxxxxxxxxxxx>
Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 11 +++++++++++
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 12 insertions(+)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 88d3df5b91c2..239d2cdbbc9f 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -42,6 +42,9 @@
#define F_INVLD_EN1 BIT(1)
#define REG_MMU_MISC_CTRL 0x048
+#define F_MMU_IN_ORDER_WR_EN (BIT(1) | BIT(17))
+#define F_MMU_STANDARD_AXI_MODE_BIT (BIT(3) | BIT(19))
+
#define REG_MMU_DCM_DIS 0x050
#define REG_MMU_CTRL_REG 0x110
@@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
}
+ if (data->plat_data->has_misc_ctrl) {
+ /* For mm_iommu, it can improve performance by the setting */
+ regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
+ regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
+ regval &= ~F_MMU_IN_ORDER_WR_EN;
+ writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
+ }
+
if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
dev_name(data->dev), (void *)data)) {
writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 1b6ea839b92c..d711ac630037 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
/* HW will use the EMI clock if there isn't the "bclk". */
bool has_bclk;
+ bool has_misc_ctrl;
bool has_vld_pa_rng;
bool reset_axi;
unsigned char larbid_remap[MTK_LARB_NR_MAX];
--
2.18.0
