Re: [PATCH v6 3/4] arm64: dts: imx8mq: enable Hantro G1/G2 VPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Shawn,

Gentle ping.

Thanks a lot!
Ezequiel

On Wed, 27 May 2020 at 22:02, Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
>
> On Wed, 2020-05-27 at 18:19 +0200, Philipp Zabel wrote:
> > Hi Shawn,
> >
> > On Fri, 2020-03-20 at 14:12 +0100, Philipp Zabel wrote:
> > > Add the i.MX8MQ VPU module which comprises Hantro G1 and G2 video
> > > decoder cores and a reset/control block.
> > >
> > > Hook up the bus clock to the VPU power domain to enable handshakes, and
> > > configure the core clocks to 600 MHz and the bus clock to 800 MHz by
> > > default.
> > >
> > > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> >
> > could you pick up this patch? The driver and binding parts have been
> > merged in media/master.
> >
>
> Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> Tested-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
>
> It looks good and it matches the downstream device tree.
>
> Thanks,
> Ezequiel
>
> > regards
> > Philipp
> >
> > > ---
> > > New in v6.
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 27 +++++++++++++++++++++++
> > >  1 file changed, 27 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > index 6a1e83922c71..98e464ecb68a 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > @@ -666,6 +666,7 @@
> > >                                     pgc_vpu: power-domain@6 {
> > >                                             #power-domain-cells = <0>;
> > >                                             reg = <IMX8M_POWER_DOMAIN_VPU>;
> > > +                                           clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > >                                     };
> > >
> > >                                     pgc_disp: power-domain@7 {
> > > @@ -1130,6 +1131,32 @@
> > >                     status = "disabled";
> > >             };
> > >
> > > +           vpu: video-codec@38300000 {
> > > +                   compatible = "nxp,imx8mq-vpu";
> > > +                   reg = <0x38300000 0x10000>,
> > > +                         <0x38310000 0x10000>,
> > > +                         <0x38320000 0x10000>;
> > > +                   reg-names = "g1", "g2", "ctrl";
> > > +                   interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> > > +                                <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> > > +                   interrupt-names = "g1", "g2";
> > > +                   clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> > > +                            <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> > > +                            <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > +                   clock-names = "g1", "g2", "bus";
> > > +                   assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> > > +                                     <&clk IMX8MQ_CLK_VPU_G2>,
> > > +                                     <&clk IMX8MQ_CLK_VPU_BUS>,
> > > +                                     <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > > +                   assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > > +                                            <&clk IMX8MQ_VPU_PLL_OUT>,
> > > +                                            <&clk IMX8MQ_SYS1_PLL_800M>,
> > > +                                            <&clk IMX8MQ_VPU_PLL>;
> > > +                   assigned-clock-rates = <600000000>, <600000000>,
> > > +                                          <800000000>, <0>;
> > > +                   power-domains = <&pgc_vpu>;
> > > +           };
> > > +
> > >             pcie0: pcie@33800000 {
> > >                     compatible = "fsl,imx8mq-pcie";
> > >                     reg = <0x33800000 0x400000>,
>
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux