Re: [PATCH v6 3/4] arm64: dts: imx8mq: enable Hantro G1/G2 VPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-05-27 at 18:19 +0200, Philipp Zabel wrote:
> Hi Shawn,
> 
> On Fri, 2020-03-20 at 14:12 +0100, Philipp Zabel wrote:
> > Add the i.MX8MQ VPU module which comprises Hantro G1 and G2 video
> > decoder cores and a reset/control block.
> > 
> > Hook up the bus clock to the VPU power domain to enable handshakes, and
> > configure the core clocks to 600 MHz and the bus clock to 800 MHz by
> > default.
> > 
> > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> 
> could you pick up this patch? The driver and binding parts have been
> merged in media/master.
> 

Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
Tested-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>

It looks good and it matches the downstream device tree.

Thanks,
Ezequiel

> regards
> Philipp
> 
> > ---
> > New in v6.
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 27 +++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 6a1e83922c71..98e464ecb68a 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -666,6 +666,7 @@
> >  					pgc_vpu: power-domain@6 {
> >  						#power-domain-cells = <0>;
> >  						reg = <IMX8M_POWER_DOMAIN_VPU>;
> > +						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> >  					};
> >  
> >  					pgc_disp: power-domain@7 {
> > @@ -1130,6 +1131,32 @@
> >  			status = "disabled";
> >  		};
> >  
> > +		vpu: video-codec@38300000 {
> > +			compatible = "nxp,imx8mq-vpu";
> > +			reg = <0x38300000 0x10000>,
> > +			      <0x38310000 0x10000>,
> > +			      <0x38320000 0x10000>;
> > +			reg-names = "g1", "g2", "ctrl";
> > +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "g1", "g2";
> > +			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> > +				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> > +				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > +			clock-names = "g1", "g2", "bus";
> > +			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> > +					  <&clk IMX8MQ_CLK_VPU_G2>,
> > +					  <&clk IMX8MQ_CLK_VPU_BUS>,
> > +					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > +			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > +						 <&clk IMX8MQ_VPU_PLL_OUT>,
> > +						 <&clk IMX8MQ_SYS1_PLL_800M>,
> > +						 <&clk IMX8MQ_VPU_PLL>;
> > +			assigned-clock-rates = <600000000>, <600000000>,
> > +					       <800000000>, <0>;
> > +			power-domains = <&pgc_vpu>;
> > +		};
> > +
> >  		pcie0: pcie@33800000 {
> >  			compatible = "fsl,imx8mq-pcie";
> >  			reg = <0x33800000 0x400000>,





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux