Currently the PL330 is enabled by default. However if left in IDM reset, as is
the case with the Meraki and Synology NSP devices, the system will hang when
probing for the PL330's AMBA peripheral ID. We therefore should be able to
disable it in these cases.
The PL330 is also included among of the list of peripherals put into coherent
mode, so "dma-coherent" has been added here as well.
Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 4 +++-
arch/arm/boot/dts/bcm958522er.dts | 4 ++++
arch/arm/boot/dts/bcm958525er.dts | 4 ++++
arch/arm/boot/dts/bcm958525xmc.dts | 4 ++++
arch/arm/boot/dts/bcm958622hr.dts | 4 ++++
arch/arm/boot/dts/bcm958623hr.dts | 4 ++++
arch/arm/boot/dts/bcm958625hr.dts | 4 ++++
arch/arm/boot/dts/bcm958625k.dts | 4 ++++
8 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index da6d70f09ef1..920c0f561e5c 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -200,7 +200,7 @@ uart1: serial@400 {
status = "disabled";
};
- dma@20000 {
+ dma: dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,6 +215,8 @@ dma@20000 {
clocks = <&iprocslow>;
clock-names = "apb_pclk";
#dma-cells = <1>;
+ dma-coherent;
+ status = "disabled";
};
sdio: sdhci@21000 {
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb8a08f..7be4c4e628e0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index c339771bb22e..515164dacc4d 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8288de..09092bbd7b63 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -58,6 +58,10 @@ gpio-restart {
/* XHCI support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 96a021cebd97..3c46f5003401 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 and SLIC support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21d471e..6e5c580defe5 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 and SLIC support needed to be complete */
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 536fb24f38bb..0509c57a8366 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -69,6 +69,10 @@ &i2c0 {
status = "okay";
};
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12d83c2..1557491c1751 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -48,6 +48,10 @@ memory@60000000 {
};
};
+&dma {
+ status = "okay";
+};
+
&amac0 {
status = "okay";
};
--
2.25.4
