Add initial support for imx8mp usb phy support, imx8mp usb has a silimar phy as imx8mq, which has some different customizations on clock and low power design when SoC integration. Signed-off-by: Li Jun <jun.li@xxxxxxx> diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c index 0c4833d..030bf4e 100644 --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -4,12 +4,16 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/delay.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/regulator/consumer.h> #define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) +#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) +#define PHY_CTRL0_FSEL_24M (0x2a << 5) #define PHY_CTRL1 0x4 #define PHY_CTRL1_RESET BIT(0) @@ -20,6 +24,11 @@ #define PHY_CTRL2 0x8 #define PHY_CTRL2_TXENABLEN0 BIT(8) +#define PHY_CTRL2_OTG_DISABLE BIT(9) + +#define PHY_CTRL6 0x18 +#define PHY_CTRL6_ALT_CLK_EN BIT(1) +#define PHY_CTRL6_ALT_CLK_SEL BIT(0) struct imx8mq_usb_phy { struct phy *phy; @@ -54,6 +63,44 @@ static int imx8mq_usb_phy_init(struct phy *phy) return 0; } +static int imx8mp_usb_phy_init(struct phy *phy) +{ + struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + u32 value; + + /* USB3.0 PHY signal fsel for 24M ref */ + value = readl(imx_phy->base + PHY_CTRL0); + value &= ~PHY_CTRL0_FSEL_MASK; + value |= PHY_CTRL0_FSEL_24M; + writel(value, imx_phy->base + PHY_CTRL0); + + /* Disable alt_clk_en and use internal MPLL clocks */ + value = readl(imx_phy->base + PHY_CTRL6); + value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN); + writel(value, imx_phy->base + PHY_CTRL6); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0); + value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; + writel(value, imx_phy->base + PHY_CTRL1); + + value = readl(imx_phy->base + PHY_CTRL0); + value |= PHY_CTRL0_REF_SSP_EN; + writel(value, imx_phy->base + PHY_CTRL0); + + value = readl(imx_phy->base + PHY_CTRL2); + value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE; + writel(value, imx_phy->base + PHY_CTRL2); + + udelay(10); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); + writel(value, imx_phy->base + PHY_CTRL1); + + return 0; +} + static int imx8mq_phy_power_on(struct phy *phy) { struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); @@ -83,12 +130,29 @@ static struct phy_ops imx8mq_usb_phy_ops = { .owner = THIS_MODULE, }; +static struct phy_ops imx8mp_usb_phy_ops = { + .init = imx8mp_usb_phy_init, + .power_on = imx8mq_phy_power_on, + .power_off = imx8mq_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id imx8mq_usb_phy_of_match[] = { + {.compatible = "fsl,imx8mq-usb-phy", + .data = &imx8mq_usb_phy_ops,}, + {.compatible = "fsl,imx8mp-usb-phy", + .data = &imx8mp_usb_phy_ops,}, + { } +}; +MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); + static int imx8mq_usb_phy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct device *dev = &pdev->dev; struct imx8mq_usb_phy *imx_phy; struct resource *res; + const struct of_device_id *of_id; imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); if (!imx_phy) @@ -105,7 +169,12 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(imx_phy->base)) return PTR_ERR(imx_phy->base); - imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops); + of_id = of_match_device(imx8mq_usb_phy_of_match, dev); + if (!of_id) + return -ENODEV; + + imx_phy->phy = devm_phy_create(dev, NULL, (const struct phy_ops *) + of_id->data); if (IS_ERR(imx_phy->phy)) return PTR_ERR(imx_phy->phy); @@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } -static const struct of_device_id imx8mq_usb_phy_of_match[] = { - {.compatible = "fsl,imx8mq-usb-phy",}, - { }, -}; -MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); - static struct platform_driver imx8mq_usb_phy_driver = { .probe = imx8mq_usb_phy_probe, .driver = { -- 2.7.4