Re: [PATCH 1/6] arm64: dts: qcom: sm8150: add apps_smmu node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nico,

On 2020-06-05 20:01, Nicolas Dechesne wrote:
On Fri, Jun 5, 2020 at 4:14 PM Sai Prakash Ranjan
<saiprakash.ranjan@xxxxxxxxxxxxxx> wrote:

On 2020-06-05 19:40, Jonathan Marek wrote:
> On 6/5/20 10:03 AM, Sai Prakash Ranjan wrote:
>> On 2020-05-29 08:45, Bjorn Andersson wrote:
>>> On Thu 28 May 20:02 PDT 2020, Jonathan Marek wrote:
>>>
>>>>
>>>>
>>>> On 5/28/20 10:52 PM, Bjorn Andersson wrote:
>>>> > On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
>>>> >
>>>> > > Add the apps_smmu node for sm8150. Note that adding the iommus field for
>>>> > > UFS is required because initializing the iommu removes the bypass mapping
>>>> > > that created by the bootloader.
>>>> > >
>>>> >
>>>> > Unrelated to the patch itself; how do you disable the splash screen on
>>>> > 8150? "fastboot oem select-display-panel none" doesn't seem to work for
>>>> > me on the MTP - and hence this would prevent my device from booting.
>>>> >
>>>> > Thanks,
>>>> > Bjorn
>>>> >
>>>>
>>>> I don't have a MTP, but on HDK855, "fastboot oem
>>>> select-display-panel none"
>>>> combined with setting the physical switch to HDMI mode (which
>>>> switches off
>>>> the 1440x2560 panel) gets it to not setup the display at all (just
>>>> the
>>>> fastboot command isn't enough).
>>>>
>>>
>>> Okay, I don't think we have anything equivalent on the MTP, but good
>>> to
>>> know.
>>>
>>
>> Actually I tried out this in SM8150 MTP and it works fine for me,
>>
>> "fastboot set_active a; fastboot set_active b; fastboot set_active a;
>> fastboot oem select-display-panel none; fastboot reboot bootloader;
>> fastboot boot boot-sm8150.img"
>>
>> Also I need to switch slots everytime like above, otherwise I always
>> see some error
>> while loading the boot image.
>>
>
> What is the error? If it is "FAILED (remote: Failed to
> load/authenticate boot image: Load Error)" then flashing/erasing
> boot_a will make it go away ("fastboot erase boot_a") for the next 6
> or so "failed" boots.
>

Yes this exact error.

The bootloader maintains a 'boot status' in one of the partition
attributes. After a certain amount of 'failed' boot , it will switch
to the other boot partition. It's the same thing on RB3/DB845c. In our
release for DB845c, we are patching the bootloader so that this
behavior is bypassed. On typical 'product' there is a user space
application that will come and set the partition attribute to indicate
the boot was successful.

For the record, this is the patch we use on 845c:
https://git.linaro.org/landing-teams/working/qualcomm/abl.git/commit/?h=release/LE.UM.2.3.7-09200-sda845.0&id=e3dc60213234ed626161a568ba587ddac63c5158

rebuilding EDK2/ABL requires access to signing tools.. so it might not
be possible for everyone. but in case you can, it should be
straightforward to reuse this patch.


Thank you for these details and the patch, it's very useful.
I do have access to ABL code and the signing tools and can build one.

Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux