On 2020-06-05 19:40, Jonathan Marek wrote:
On 6/5/20 10:03 AM, Sai Prakash Ranjan wrote:
On 2020-05-29 08:45, Bjorn Andersson wrote:
On Thu 28 May 20:02 PDT 2020, Jonathan Marek wrote:
On 5/28/20 10:52 PM, Bjorn Andersson wrote:
> On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:
>
> > Add the apps_smmu node for sm8150. Note that adding the iommus field for
> > UFS is required because initializing the iommu removes the bypass mapping
> > that created by the bootloader.
> >
>
> Unrelated to the patch itself; how do you disable the splash screen on
> 8150? "fastboot oem select-display-panel none" doesn't seem to work for
> me on the MTP - and hence this would prevent my device from booting.
>
> Thanks,
> Bjorn
>
I don't have a MTP, but on HDK855, "fastboot oem
select-display-panel none"
combined with setting the physical switch to HDMI mode (which
switches off
the 1440x2560 panel) gets it to not setup the display at all (just
the
fastboot command isn't enough).
Okay, I don't think we have anything equivalent on the MTP, but good
to
know.
Actually I tried out this in SM8150 MTP and it works fine for me,
"fastboot set_active a; fastboot set_active b; fastboot set_active a;
fastboot oem select-display-panel none; fastboot reboot bootloader;
fastboot boot boot-sm8150.img"
Also I need to switch slots everytime like above, otherwise I always
see some error
while loading the boot image.
What is the error? If it is "FAILED (remote: Failed to
load/authenticate boot image: Load Error)" then flashing/erasing
boot_a will make it go away ("fastboot erase boot_a") for the next 6
or so "failed" boots.
Yes this exact error.
-Sai
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation
