Hi Michael, On 23/03/2020 13:15, Michael Kao wrote: > This patchset supports for MT8183 chip to mtk_thermal.c. > Add thermal zone of all the thermal sensor in SoC for > another get temperatrue. They don't need to thermal throttle. > And we bind coolers for thermal zone nodes of cpu_thermal. > > Rebase to kernel-5.6-rc1. > > Update content: > > [1/7] > - Squash thermal zone settings in the dtsi from [v3,5/8] > arm64: dts: mt8183: Increase polling frequency for CPU thermal zone > > - Remove the property of interrupts and mediatek,hw-reset-temp > > [2/7] > - Correct commit message > > [4/7] > - Change the target temperature to the 80C and change the commit message > > [6/7] > - Adjust newline alignment > > - Fix the judgement on the return value of registering thermal zone > > This patch series base on these patches [1]. > > [v7,3/3] PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/11439829/) > > Matthias Kaehlcke (1): > arm64: dts: mt8183: Configure CPU cooling > > Michael Kao (6): > arm64: dts: mt8183: add thermal zone node > arm64: dts: mt8183: add dynamic power coefficients > arm64: dts: mt8183: Add #cooling-cells to CPU nodes > thermal: mediatek: mt8183: fix bank number settings Do I understand correctly that we need to fix the bank number before we can add the device tree changes. And that the last two patches are enhancements for the driver but needed to get a working version? Regards, Matthias > thermal: mediatek: add another get_temp ops for thermal sensors > thermal: mediatek: use spinlock to protect PTPCORESEL > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 156 +++++++++++++++++++++++ > drivers/thermal/mtk_thermal.c | 88 +++++++++++-- > 2 files changed, 231 insertions(+), 13 deletions(-) >
