On Thu, 2020-05-21 at 14:51 +0200, Matthias Brugger wrote: > Hi Michael, > > On 23/03/2020 13:15, Michael Kao wrote: > > This patchset supports for MT8183 chip to mtk_thermal.c. > > Add thermal zone of all the thermal sensor in SoC for > > another get temperatrue. They don't need to thermal throttle. > > And we bind coolers for thermal zone nodes of cpu_thermal. > > > > Rebase to kernel-5.6-rc1. > > > > Update content: > > > > [1/7] > > - Squash thermal zone settings in the dtsi from [v3,5/8] > > arm64: dts: mt8183: Increase polling frequency for CPU thermal zone > > > > - Remove the property of interrupts and mediatek,hw-reset-temp > > > > [2/7] > > - Correct commit message > > > > [4/7] > > - Change the target temperature to the 80C and change the commit message > > > > [6/7] > > - Adjust newline alignment > > > > - Fix the judgement on the return value of registering thermal zone > > > > This patch series base on these patches [1]. > > > > [v7,3/3] PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/11439829/) > > > > Matthias Kaehlcke (1): > > arm64: dts: mt8183: Configure CPU cooling > > > > Michael Kao (6): > > arm64: dts: mt8183: add thermal zone node > > arm64: dts: mt8183: add dynamic power coefficients > > arm64: dts: mt8183: Add #cooling-cells to CPU nodes > > thermal: mediatek: mt8183: fix bank number settings > > Do I understand correctly that we need to fix the bank number before we can add > the device tree changes. And that the last two patches are enhancements for the > driver but needed to get a working version? > > Regards, > Matthias > Hi Matthias, There is one bank setting of mt8183 config. If the device tree merged first. I worry that it will crash when the thermal zone read temperature. It will access the invalid index of bank. So please wait the patch "fix bank number settings " merged first. Thanks! /* MT8183 thermal sensor data */ static const int mt8183_bank_data[MT8183_NUM_SENSORS] = { MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB }; Best Regards, Michael > > thermal: mediatek: add another get_temp ops for thermal sensors > > thermal: mediatek: use spinlock to protect PTPCORESEL > > > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 156 +++++++++++++++++++++++ > > drivers/thermal/mtk_thermal.c | 88 +++++++++++-- > > 2 files changed, 231 insertions(+), 13 deletions(-) > >
