Re: [PATCH v2 1/4] dt-bindings: mtd: rawnand: ingenic: Clarify the active state of the RB pin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

This .txt file is going away, so there's no need to apply this one patch.

I Cc'd you on the V2 of the patchset that drops this file.

-Paul


Le mer. 20 mai 2020 à 1:24, Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> a écrit :
Let's make things consistent with other bindings and clarify the
expected active state.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
---
Changes in v2:
* New patch
---
 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
index c02259353327..4cbe13f94564 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -30,7 +30,8 @@ Optional children node properties:
 - nand-ecc-strength: ECC strength (max number of correctable bits).
- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default - nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
-- rb-gpios: GPIO specifier for the busy pin.
+- rb-gpios: GPIO specifier for the ready/busy pin. The active state (ready)
+            should be high unless the signal is inverted.
 - wp-gpios: GPIO specifier for the write protect pin.

 Optional child node of NAND chip nodes:
--
2.25.4







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux