On 5/13/2020 10:52 PM, Laurent Pinchart wrote: > From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> > > Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed > Processing System Gigabit Transceiver which provides PHY capabilities to > USB, SATA, PCIE, Display Port and Ehernet SGMII controllers. > > Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Need RobH Ack for this to be merged. Thanks Kishon > --- > Changes since v7: > > - Switch to GPL-2.0-only OR BSD-2-Clause > > Changes since v6: > > - Fixed specification of compatible-dependent xlnx,tx-termination-fix > property > - Dropped status property from example > - Use 4 spaces to indent example > > Changes since v5: > > - Document clocks and clock-names properties > - Document resets and reset-names properties > - Replace subnodes with an additional entry in the PHY cells > - Drop lane frequency PHY cell, replaced by reference clock phandle > - Convert bindings to YAML > - Reword the subject line > - Drop Rob's R-b as the bindings have significantly changed > - Drop resets and reset-names properties > --- > .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++++++++++++++++++ > include/dt-bindings/phy/phy.h | 1 + > 2 files changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml > > diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml > new file mode 100644 > index 000000000000..09e3cde7ebca > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + > +description: | > + This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The > + GTR provides four lanes and is used by USB, SATA, PCIE, Display port and > + Ethernet SGMII controllers. > + > +properties: > + "#phy-cells": > + const: 4 > + description: | > + The cells contain the following arguments. > + > + - description: The GTR lane > + minimum: 0 > + maximum: 3 > + - description: The PHY type > + enum: > + - PHY_TYPE_DP > + - PHY_TYPE_PCIE > + - PHY_TYPE_SATA > + - PHY_TYPE_SGMII > + - PHY_TYPE_USB > + - description: The PHY instance > + minimum: 0 > + maximum: 1 # for DP, SATA or USB > + maximum: 3 # for PCIE or SGMII > + - description: The reference clock number > + minimum: 0 > + maximum: 3 > + > + compatible: > + enum: > + - xlnx,zynqmp-psgtr-v1.1 > + - xlnx,zynqmp-psgtr > + > + clocks: > + minItems: 1 > + maxItems: 4 > + description: | > + Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected > + inputs shall not have an entry. > + > + clock-names: > + minItems: 1 > + maxItems: 4 > + items: > + pattern: "^ref[0-3]$" > + > + reg: > + items: > + - description: SERDES registers block > + - description: SIOU registers block > + > + reg-names: > + items: > + - const: serdes > + - const: siou > + > + xlnx,tx-termination-fix: > + description: | > + Include this for fixing functional issue with the TX termination > + resistance in GT, which can be out of spec for the XCZU9EG silicon > + version. > + type: boolean > + > +required: > + - "#phy-cells" > + - compatible > + - reg > + - reg-names > + > +if: > + properties: > + compatible: > + const: xlnx,zynqmp-psgtr-v1.1 > + > +then: > + properties: > + xlnx,tx-termination-fix: false > + > +additionalProperties: false > + > +examples: > + - | > + phy: phy@fd400000 { > + compatible = "xlnx,zynqmp-psgtr-v1.1"; > + reg = <0x0 0xfd400000 0x0 0x40000>, > + <0x0 0xfd3d0000 0x0 0x1000>; > + reg-names = "serdes", "siou"; > + clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>; > + clock-names = "ref1", "ref2", "ref3"; > + #phy-cells = <4>; > + }; > + > +... > diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h > index 1f3f866fae7b..f6bc83b66ae9 100644 > --- a/include/dt-bindings/phy/phy.h > +++ b/include/dt-bindings/phy/phy.h > @@ -17,5 +17,6 @@ > #define PHY_TYPE_USB3 4 > #define PHY_TYPE_UFS 5 > #define PHY_TYPE_DP 6 > +#define PHY_TYPE_SGMII 7 > > #endif /* _DT_BINDINGS_PHY */ >
