This patches do some prep (device tree vendor addition, missing ethernet definitions for IPQ8064 dts) and then add an initial device tree for the MikroTik RB3011 1U router, which is an IPQ8064 device with 1G RAM. They are sufficient to boot with an initrd, the serial console and the first 5 switch ports fully functional (the second bank of 5 require some extra patches to the QCA8K driver which will follow later). The bootloader NOR is also supported, but the 128MB NAND is not yet enabled. Jonathan McDowell (3): dt-bindings: vendor-prefixes: Add MikroTik ARM: dts: qcom: add ethernet definitions to ipq8064 ARM: dts: qcom: Add MikroTik RB3011 .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 308 ++++++++++++++++++ arch/arm/boot/dts/qcom-ipq8064.dtsi | 108 ++++++ 4 files changed, 419 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -- 2.20.1
