On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes value contains in internal register to address
> with large dma access support.
>
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 34 +++++++++++++++++++++++-
> include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
> include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++
> 3 files changed, 55 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 33153d17c9d9..90f1ff2b4b00 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -18,6 +18,10 @@ struct cmdq_instruction {
> union {
> u32 value;
> u32 mask;
> + struct {
> + u16 arg_c;
> + u16 src_reg;
> + };
> };
> union {
> u16 offset;
> @@ -29,7 +33,7 @@ struct cmdq_instruction {
> struct {
> u8 sop:5;
> u8 arg_c_t:1;
> - u8 arg_b_t:1;
> + u8 src_t:1;
fixing patch 6/13 please. seems the struct should be added in this patch.
> u8 dst_t:1;
> };
> };
> @@ -222,6 +226,34 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> }
> EXPORT_SYMBOL(cmdq_pkt_write_mask);
>
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u16 src_reg_idx, u32 mask)
> +{
> + struct cmdq_instruction inst = { {0} };
> + int err;
> +
> + if (mask != U32_MAX) {
> + inst.op = CMDQ_CODE_MASK;
> + inst.mask = ~mask;
> + err = cmdq_pkt_append_command(pkt, inst);
> + if (err < 0)
> + return err;
> +
> + inst.mask = 0;
> + inst.op = CMDQ_CODE_WRITE_S_MASK;
> + } else {
> + inst.op = CMDQ_CODE_WRITE_S;
> + }
> +
> + inst.src_t = CMDQ_REG_TYPE;
Not defined.
Please make sure that every patch compiles on it's own and does not add a
regression. This is very helpful if we have to bisect the kernel in the future.
> + inst.sop = high_addr_reg_idx;
> + inst.offset = addr_low;
> + inst.src_reg = src_reg_idx;
> +
> + return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s);
> +
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 121c3bb6d3de..8ef87e1bd03b 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,8 @@ enum cmdq_code {
> CMDQ_CODE_JUMP = 0x10,
> CMDQ_CODE_WFE = 0x20,
> CMDQ_CODE_EOC = 0x40,
> + CMDQ_CODE_WRITE_S = 0x90,
> + CMDQ_CODE_WRITE_S_MASK = 0x91,
> CMDQ_CODE_LOGIC = 0xa0,
> };
>
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 83340211e1d3..c72d826d8934 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -12,6 +12,8 @@
> #include <linux/timer.h>
>
> #define CMDQ_NO_TIMEOUT 0xffffffffu
> +#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0)))
> +#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1))
>
> struct cmdq_pkt;
>
> @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
> int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
> u16 offset, u32 value, u32 mask);
>
> +/**
> + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> + * @pkt: the CMDQ packet
> + * @high_addr_reg_idx: internal regisger ID which contains high address of pa
s/regisger/register
> + * @addr_low: low address of pa
> + * @src_reg_idx: the CMDQ internal register ID which cache source value
> + * @mask: the specified target address mask, use U32_MAX if no need
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> + * to get high addrees and call cmdq_pkt_assign() to assign value into internal
s/addrees/address
> + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameterwhen
s/parameterwhen/parameter when
> + * call to this function.
> + */
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u16 src_reg_idx, u32 mask);
> +
In general I wonder if we shouldn't provide two functions, one that writes a
mask and on for the else case.
Regards,
Matthias
> /**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> * @pkt: the CMDQ packet
>
