> > Hi Oleksij
> >
> > reg is normally 0 to 31, since that is the address range for MDIO.
> > Did you use 14 here because of what strapping allows?
>
> Yes. Only BITs 1:3 are configurable. BIT(0) is always 0 for the PHY0 and 1
> for the PHY1
O.K. good.
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - '#address-cells'
> > > + - '#size-cells'
> >
> > So we have two different meanings of 'required' here.
> >
> > One meaning is the code requires it. compatible is not required, the
> > driver will correctly be bind to the device based on its ID registers.
> > Is reg also required by the code?
> >
> > The second meaning is about keeping the yaml verifier happy. It seems
> > like compatible is needed for the verifier. Is reg also required? We
> > do recommend having reg, but the generic code does not require it.
>
> reg is used by:
> tja1102_p0_probe()
> tja1102_p1_register()
> of_mdio_parse_addr()
>
> But this is required for the slave PHY. I assume the reg can be
> optional for the master PHY. Should I?
It is recommended to have a reg value. So lets leave it as is for the
moment. If anybody really does need it to be optional, we can change
it later.
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
