On Tue, May 05, 2020 at 12:42:15PM +0200, Oleksij Rempel wrote: > To properly identify this node, we need to use ethernet-phy-id0180.dc80. > And add missing required properties. > > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/net/nxp,tja11xx.yaml | 55 ++++++++++++------- > 1 file changed, 35 insertions(+), 20 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml > index 42be0255512b3..cc322107a24a2 100644 > --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml > +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml > @@ -1,4 +1,4 @@ > -# SPDX-License-Identifier: GPL-2.0+ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > %YAML 1.2 > --- > $id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml# > @@ -12,44 +12,59 @@ maintainers: > - Heiner Kallweit <hkallweit1@xxxxxxxxx> > > description: > - Bindings for NXP TJA11xx automotive PHYs > + Bindings for the NXP TJA1102 automotive PHY. This is a dual PHY package where > + only the first PHY has global configuration register and HW health > + monitoring. > > -allOf: > - - $ref: ethernet-phy.yaml# > +properties: > + compatible: > + const: ethernet-phy-id0180.dc80 > + description: ethernet-phy-id0180.dc80 used for TJA1102 PHY > + > + reg: > + minimum: 0 > + maximum: 14 > + description: > + The PHY address of the parent PHY. Hi Oleksij reg is normally 0 to 31, since that is the address range for MDIO. Did you use 14 here because of what strapping allows? > +required: > + - compatible > + - reg > + - '#address-cells' > + - '#size-cells' So we have two different meanings of 'required' here. One meaning is the code requires it. compatible is not required, the driver will correctly be bind to the device based on its ID registers. Is reg also required by the code? The second meaning is about keeping the yaml verifier happy. It seems like compatible is needed for the verifier. Is reg also required? We do recommend having reg, but the generic code does not require it. Andrew
