Re: [RESEND PATCH v5 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 18, 2020 at 12:45 AM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> Le sam. 18 avril 2020 à 0:42, Andy Shevchenko
> <andy.shevchenko@xxxxxxxxx> a écrit :
> > On Sat, Apr 18, 2020 at 12:18 AM Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> > wrote:
> >>  Le sam. 18 avril 2020 à 0:13, Andy Shevchenko
> >>  <andy.shevchenko@xxxxxxxxx> a écrit :
> >>  > On Sat, Apr 18, 2020 at 12:05 AM Paul Cercueil
> >> <paul@xxxxxxxxxxxxxxx>
> >>  > wrote:
> >>  >>  Le ven. 17 avril 2020 à 23:59, Andy Shevchenko
> >>  >>  <andy.shevchenko@xxxxxxxxx> a écrit :
> >>  >>  > On Fri, Apr 17, 2020 at 11:21 PM Artur Rojek
> >>  >> <contact@xxxxxxxxxxxxxx>
> >>  >>  > wrote:
> >>  >
> >>  > ...
> >>  >
> >>  >>  >>  +       irq = platform_get_irq(pdev, 0);
> >>  >>  >
> >>  >>  > Before it worked w/o IRQ, here is a regression you introduced.
> >>  >>
> >>  >>  Before it simply did not need the IRQ, which is provided by the
> >>  >>  devicetree anyway. No regression here.
> >>  >
> >>  > Does it work without IRQ? Or it was a dead code till now?
> >>  > For me it's clear regression. Otherwise something is really wrong
> >> in a
> >>  > process of development of this driver.
> >>
> >>  Nothing wrong here. The IRQ was not used by the driver for the
> >>  functionality it provided before. It is required now to support the
> >>  touchscreen channels.
> >
> > This is exactly what's wrong.
> > Previous DTS for my (hypothetical) case has no IRQ defined. Everything
> > works, right?
> > Now, due to this change it breaks my setup. Don't you see the problem?
>
> The IRQ has been provided by every concerned DTS file since the
> introduction of this driver and the related bindings, even though it
> was not used by the driver.

Can you speak for all possible DTSs/DTBs in the wild?
Okay, in any case it will be problem of maintainers and yours if
somebody complains.
I'm not going to push this anyway -- your choice.

But I see a (potential) regression.

> >>  >>  >>  +       if (irq < 0) {
> >>  >>  >
> >>  >>  >>  +               dev_err(dev, "Failed to get irq: %d\n",
> >> irq);
> >>  >>  >
> >>  >>  > Redundant message.
> >>  >>  >
> >>  >>  >>  +               return irq;
> >>  >>  >>  +       }

-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux