Re: [PATCH v8 4/6] power: supply: Add support for mps mp2629 battery charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Apr 13, 2020 at 10:28:19PM +0200, saravanan sekar wrote:
> Hi Andy,
> 
> On 13/04/20 10:10 pm, Andy Shevchenko wrote:
> > On Mon, Apr 13, 2020 at 8:37 PM Saravanan Sekar <sravanhome@xxxxxxxxx> wrote:
> > > The mp2629 provides switching-mode battery charge management for
> > > single-cell Li-ion or Li-polymer battery. Driver supports the
> > > access/control input source and battery charging parameters.
> > ...
> > 
> > > +static int mp2629_charger_probe(struct platform_device *pdev)
> > > +{
> > > +       irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
> > Why not to use temporary variable dev?
> > 
> > This should be platform_get_irq_optional().
> 
> Platform_get_irq in turn calls platform_get_irq_optional. It was suggested
> by Lee and is it mandatory to change it?

platform_get_irq is fine.

> > > +       if (irq) {

But this must be

if (irq > 0)

or you will also try to continue with error codes.

> > > +               ret = devm_request_irq(dev, irq, mp2629_irq_handler,
> > > +                                IRQF_TRIGGER_RISING, "mp2629-charger",
> > > +                                charger);
> > > +               if (ret) {
> > > +                       dev_err(dev, "failed to request gpio IRQ\n");
> > > +                       goto iio_fail;
> > > +               }
> > > +       }
> > > +}

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux