On Mon, Apr 13, 2020 at 11:48 PM Sebastian Reichel
<sebastian.reichel@xxxxxxxxxxxxx> wrote:
> On Mon, Apr 13, 2020 at 10:28:19PM +0200, saravanan sekar wrote:
> > On 13/04/20 10:10 pm, Andy Shevchenko wrote:
> > > On Mon, Apr 13, 2020 at 8:37 PM Saravanan Sekar <sravanhome@xxxxxxxxx> wrote:
...
> > > > + irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
> > > Why not to use temporary variable dev?
> > >
> > > This should be platform_get_irq_optional().
> >
> > Platform_get_irq in turn calls platform_get_irq_optional. It was suggested
> > by Lee and is it mandatory to change it?
>
> platform_get_irq is fine.
I don't think so. It will spill an error in case there is no IRQ or
error happened.
So, either is should be _optional, or below conditional simply wrong, should be
if (irq < 0)
return irq;
> > > > + if (irq) {
>
> But this must be
>
> if (irq > 0)
>
> or you will also try to continue with error codes.
>
> > > > + ret = devm_request_irq(dev, irq, mp2629_irq_handler,
> > > > + IRQF_TRIGGER_RISING, "mp2629-charger",
> > > > + charger);
> > > > + if (ret) {
> > > > + dev_err(dev, "failed to request gpio IRQ\n");
> > > > + goto iio_fail;
> > > > + }
> > > > + }
> > > > +}
--
With Best Regards,
Andy Shevchenko
