On Wed, Apr 08, 2020 at 02:14:02PM -0400, Al Cooper wrote: > v3 - Addressed all of Andy Shevchenko's review comments for > ehci-brcm.c. > - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document, > dt_binding_check now passes. > - Added the XHCI functionality to xhci-plat.c instead of creating > new brcmstb files, as suggested by Mathias Nyman. It's nice, but have you heard what Mathias asked / proposed? > v2 - Addressed Andy Shevchenko's review comments. > - Fixed dt_binding_check error pointed out by Rob Herring. > - Removed pr_info message in ehci_brcm_init as suggested by > Greg Kroah-Hartman. > > This adds support for the XHCI, EHCI and OHCI host controllers found > in Broadcom STB SoC's. These drivers depend on getting access to the > new Broadcom STB USB PHY driver through a device-tree phandle and > will fail if the driver is not available. > > Al Cooper (4): > dt-bindings: Add Broadcom STB USB support > usb: xhci: xhci-plat: Add support for Broadcom STB SoC's > usb: ehci: Add new EHCI driver for Broadcom STB SoC's > usb: host: Add ability to build new Broadcom STB USB drivers > > .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++ > .../devicetree/bindings/usb/usb-xhci.txt | 1 + > MAINTAINERS | 8 + > drivers/usb/host/Kconfig | 16 + > drivers/usb/host/Makefile | 16 +- > drivers/usb/host/ehci-brcm.c | 286 ++++++++++++++++++ > drivers/usb/host/xhci-plat.c | 10 + > 7 files changed, 391 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml > create mode 100644 drivers/usb/host/ehci-brcm.c > > -- > 2.17.1 > -- With Best Regards, Andy Shevchenko
