On Wed, Apr 8, 2020 at 2:25 PM Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote: > > On Wed, Apr 08, 2020 at 02:14:02PM -0400, Al Cooper wrote: > > v3 - Addressed all of Andy Shevchenko's review comments for > > ehci-brcm.c. > > - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document, > > dt_binding_check now passes. > > - Added the XHCI functionality to xhci-plat.c instead of creating > > new brcmstb files, as suggested by Mathias Nyman. > > It's nice, but have you heard what Mathias asked / proposed? I thought that was what I did. Al ... > > > v2 - Addressed Andy Shevchenko's review comments. > > - Fixed dt_binding_check error pointed out by Rob Herring. > > - Removed pr_info message in ehci_brcm_init as suggested by > > Greg Kroah-Hartman. > > > > This adds support for the XHCI, EHCI and OHCI host controllers found > > in Broadcom STB SoC's. These drivers depend on getting access to the > > new Broadcom STB USB PHY driver through a device-tree phandle and > > will fail if the driver is not available. > > > > Al Cooper (4): > > dt-bindings: Add Broadcom STB USB support > > usb: xhci: xhci-plat: Add support for Broadcom STB SoC's > > usb: ehci: Add new EHCI driver for Broadcom STB SoC's > > usb: host: Add ability to build new Broadcom STB USB drivers > > > > .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++ > > .../devicetree/bindings/usb/usb-xhci.txt | 1 + > > MAINTAINERS | 8 + > > drivers/usb/host/Kconfig | 16 + > > drivers/usb/host/Makefile | 16 +- > > drivers/usb/host/ehci-brcm.c | 286 ++++++++++++++++++ > > drivers/usb/host/xhci-plat.c | 10 + > > 7 files changed, 391 insertions(+), 6 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml > > create mode 100644 drivers/usb/host/ehci-brcm.c > > > > -- > > 2.17.1 > > > > -- > With Best Regards, > Andy Shevchenko > >
