[PATCH v5 1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OV5645 sensor supports input clock frequency ranging from 6MHz to 27MHz
but the driver strictly expects this to be 24MHz (with tolerance of 1%)
with this restrictions let the driver enforce the clock frequency
internally to 24MHz rather then being passed as dt-property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/i2c/ov5645.txt | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index 72ad992f77be..a55bb728ea48 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -8,7 +8,6 @@ Required Properties:
 - compatible: Value should be "ovti,ov5645".
 - clocks: Reference to the xclk clock.
 - clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
 - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
   to the hardware pin PWDNB which is physically active low.
 - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
@@ -37,7 +36,6 @@ Example:
 
 			clocks = <&clks 200>;
 			clock-names = "xclk";
-			clock-frequency = <24000000>;
 
 			vdddo-supply = <&camera_dovdd_1v8>;
 			vdda-supply = <&camera_avdd_2v8>;
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux