On Mon, 2020-03-23 at 16:00 -0600, Rob Herring wrote:
> On Wed, Mar 11, 2020 at 03:40:29PM +0800, Jitao Shi wrote:
> > Add a property to control mipi tx drive current:
> > "drive-strength-microamp"
> >
> > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index a19a6cc375ed..d501f9ff4b1f 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -33,6 +33,9 @@ Required properties:
> > - #clock-cells: must be <0>;
> > - #phy-cells: must be <0>.
> >
> > +Optional properties:
> > +- drive-strength-microamp: adjust driving current, should be 1 ~ 0xF
>
> TBC, 1-0xf is in units of microamps? So a max drive strength of 15uA?
> Seems a bit low.
>
The minimum amp is 3000 macroamps, step is 200macroamps.
So the drive current is 3000 + 200 * drive-strength-microamp amps.
I will update "drive-strength-microamp" define next version.
BR
Jitao
> > +
> > Example:
> >
> > mipi_tx0: mipi-dphy@10215000 {
> > @@ -42,6 +45,7 @@ mipi_tx0: mipi-dphy@10215000 {
> > clock-output-names = "mipi_tx0_pll";
> > #clock-cells = <0>;
> > #phy-cells = <0>;
> > + drive-strength-microamp = <0x8>;
> > };
> >
> > dsi0: dsi@1401b000 {
> > --
> > 2.21.0
