Add properties to get get mipitx calibration data.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index d501f9ff4b1f..b179293c43de 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -34,6 +34,9 @@ Required properties:
- #phy-cells: must be <0>.
Optional properties:
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
- drive-strength-microamp: adjust driving current, should be 1 ~ 0xF
Example:
@@ -45,6 +48,8 @@ mipi_tx0: mipi-dphy@10215000 {
clock-output-names = "mipi_tx0_pll";
#clock-cells = <0>;
#phy-cells = <0>;
+ nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
drive-strength-microamp = <0x8>;
};
--
2.21.0
