On Mon 30 Mar 22:35 PDT 2020, Taniya Das wrote:
> Hi Stephen,
>
> I think the upstream design always wanted the client/consumer to enable the
> GPU Rail and then turn ON the GDSC?
>
> Why are we going ahead with adding the support of regulator in the GDSC
> driver?
>
As I (partially) describe below the mdss driver on 8996 doesn't probe
because the GDSC fails to enable, because the upstream supply is not
enabled, so the mdss driver can't turn on the regulator needed by the
GDSC.
I don't see any other way to handle this than extending the gdsc
implementation, hence my proposal to change the design.
Suggestions/feedback are welcome though.
Regards,
Bjorn
> On 3/19/2020 11:08 AM, Bjorn Andersson wrote:
> > Certain GDSCs, such as the GPU_GX on MSM8996, requires that the upstream
> > regulator supply is powered in order to be turned on.
> >
> > It's not guaranteed that the bootloader will leave these supplies on and
> > the driver core will attempt to enable any GDSCs before allowing the
> > individual drivers to probe defer on the PMIC regulator driver not yet
> > being present.
> >
> > So the gdsc driver needs to be made aware of supplying regulators and
> > probe defer on their absence, and it needs to enable and disable the
> > regulator accordingly.
> >
> > Voltage adjustments of the supplying regulator are deferred to the
> > client drivers themselves.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> > drivers/clk/qcom/gdsc.c | 24 ++++++++++++++++++++++++
> > drivers/clk/qcom/gdsc.h | 4 ++++
> > 2 files changed, 28 insertions(+)
> >
> > diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> > index a250f59708d8..3528789cc9d0 100644
> > --- a/drivers/clk/qcom/gdsc.c
> > +++ b/drivers/clk/qcom/gdsc.c
> > @@ -13,6 +13,7 @@
> > #include <linux/regmap.h>
> > #include <linux/reset-controller.h>
> > #include <linux/slab.h>
> > +#include <linux/regulator/consumer.h>
> > #include "gdsc.h"
> > #define PWR_ON_MASK BIT(31)
> > @@ -112,6 +113,12 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
> > int ret;
> > u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK;
> > + if (status == GDSC_ON && sc->rsupply) {
> > + ret = regulator_enable(sc->rsupply);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > ret = regmap_update_bits(sc->regmap, sc->gdscr, SW_COLLAPSE_MASK, val);
> > if (ret)
> > return ret;
> > @@ -143,6 +150,13 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
> > ret = gdsc_poll_status(sc, status);
> > WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n");
> > +
> > + if (!ret && status == GDSC_OFF && sc->rsupply) {
> > + ret = regulator_disable(sc->rsupply);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > return ret;
> > }
> > @@ -371,6 +385,16 @@ int gdsc_register(struct gdsc_desc *desc,
> > if (!data->domains)
> > return -ENOMEM;
> > + /* Resolve any regulator supplies */
> > + for (i = 0; i < num; i++) {
> > + if (!scs[i] || !scs[i]->supply)
> > + continue;
> > +
> > + scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply);
> > + if (IS_ERR(scs[i]->rsupply))
> > + return PTR_ERR(scs[i]->rsupply);
> > + }
> > +
> > data->num_domains = num;
> > for (i = 0; i < num; i++) {
> > if (!scs[i])
> > diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
> > index 64cdc8cf0d4d..c36fc26dcdff 100644
> > --- a/drivers/clk/qcom/gdsc.h
> > +++ b/drivers/clk/qcom/gdsc.h
> > @@ -10,6 +10,7 @@
> > #include <linux/pm_domain.h>
> > struct regmap;
> > +struct regulator;
> > struct reset_controller_dev;
> > /**
> > @@ -52,6 +53,9 @@ struct gdsc {
> > struct reset_controller_dev *rcdev;
> > unsigned int *resets;
> > unsigned int reset_count;
> > +
> > + const char *supply;
> > + struct regulator *rsupply;
> > };
> > struct gdsc_desc {
> >
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation.
>
> --
