Hi Evan, I have sent out the v7 patch by marking a dependency on the below mentioned series https://patchwork.kernel.org/project/linux-wireless/list/?series=261367 > The clocks are missing: > clocks = <&rpmhcc RPMH_RF_CLK2>; > clock-names = "cxo_ref_clk_pin"; These clocks are optional and were required for older firmware. It's not needed now. Thanks, Rakesh Pillai > -----Original Message----- > From: Evan Green <evgreen@xxxxxxxxxxxx> > Sent: Wednesday, March 25, 2020 9:34 PM > To: pillair@xxxxxxxxxxxxxx > Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS > <devicetree@xxxxxxxxxxxxxxx>; linux-arm Mailing List <linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx>; LKML <linux-kernel@xxxxxxxxxxxxxxx>; linux- > arm-msm <linux-arm-msm@xxxxxxxxxxxxxxx> > Subject: Re: [PATCH v6] arm64: dts: qcom: sc7180: Add WCN3990 WLAN > module device node > > On Wed, Mar 25, 2020 at 4:05 AM <pillair@xxxxxxxxxxxxxx> wrote: > > > > Hi Evan, > > > > I will send out a v7 for this patchset. > > Since I have to configure the S2 SIDs, it is dependent on below ath10k > patchset. > > https://patchwork.kernel.org/project/linux-wireless/list/?series=261367 > > Ah, right. Thanks for the info, I'll check out that series as well. > -Evan
