From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
This series officializes the device tree bindings for the embedded
Ethernet switch on NXP LS1028A (and for the reference design board).
The driver has been in the tree since v5.4-rc6.
As per feedback received in v1, I've changed the DT bindings for the
internal ports from "gmii" to "internal". So I would like the entire
series to be merged through a single tree, be it net-next or devicetree.
If this happens, I would like the other maintainer to acknowledge this
fact and the patches themselves. Thanks.
Claudiu Manoil (2):
arm64: dts: fsl: ls1028a: add node for Felix switch
arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
Vladimir Oltean (3):
arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC
RCIE
net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
dt-bindings: net: dsa: ocelot: document the vsc9959 core
.../devicetree/bindings/net/dsa/ocelot.txt | 96 +++++++++++++++++++
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 51 ++++++++++
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 85 +++++++++++++++-
drivers/net/dsa/ocelot/felix.c | 3 +-
drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +-
5 files changed, 232 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt
--
2.17.1
