On Wed, Feb 19, 2020 at 05:12:54PM +0200, Vladimir Oltean wrote: > From: Vladimir Oltean <vladimir.oltean@xxxxxxx> > > This series officializes the device tree bindings for the embedded > Ethernet switch on NXP LS1028A (and for the reference design board). > The driver has been in the tree since v5.4-rc6. > > As per feedback received in v1, I've changed the DT bindings for the > internal ports from "gmii" to "internal". So I would like the entire > series to be merged through a single tree, be it net-next or devicetree. Will applying the patches via different trees as normal cause any issue like build breakage or regression on either tree? Otherwise, I do not see the series needs to go in through a single tree. Shawn > If this happens, I would like the other maintainer to acknowledge this > fact and the patches themselves. Thanks. > > Claudiu Manoil (2): > arm64: dts: fsl: ls1028a: add node for Felix switch > arm64: dts: fsl: ls1028a: enable switch PHYs on RDB > > Vladimir Oltean (3): > arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC > RCIE > net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII > dt-bindings: net: dsa: ocelot: document the vsc9959 core > > .../devicetree/bindings/net/dsa/ocelot.txt | 96 +++++++++++++++++++ > .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 51 ++++++++++ > .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 85 +++++++++++++++- > drivers/net/dsa/ocelot/felix.c | 3 +- > drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +- > 5 files changed, 232 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt > > -- > 2.17.1 >