Convert the fixed-factor-clock binding to DT schema format using json-schema. While at that, fix a couple of small errors: make the file base name match the compatible string, add an example and document the reg-names property. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- .../bindings/clock/marvell,mmp2-clock.yaml | 62 +++++++++++++++++++ .../bindings/clock/marvell,mmp2.txt | 21 ------- 2 files changed, 62 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/marvell,mmp2.txt diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml new file mode 100644 index 0000000000000..c5fc2ad0236dd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP2 Clock Controller + +maintainers: + - Lubomir Rintel <lkundrak@xxxxx> + +description: | + The MMP2 clock subsystem generates and supplies clock to various + controllers within the MMP2 SoC. + + Each clock is assigned an identifier and client nodes use this identifier + to specify the clock which they consume. + + All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. + +properties: + compatible: + const: marvell,mmp2-clock # controller compatible with MMP2 SoC + + reg: + items: + - description: MPMU register region + - description: APMU register region + - description: APBC register region + + reg-names: + items: + - const: mpmu + - const: apmu + - const: apbc + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + clock-controller@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt deleted file mode 100644 index 23b52dc02266a..0000000000000 --- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Marvell MMP2 Clock Controller - -The MMP2 clock subsystem generates and supplies clock to various -controllers within the MMP2 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "marvell,mmp2-clock" - controller compatible with MMP2 SoC. - -- reg: physical base address of the clock subsystem and length of memory mapped - region. There are 3 places in SOC has clock control logic: - "mpmu", "apmu", "apbc". So three reg spaces need to be defined. - -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>. -- 2.24.1
