On Sat, Feb 08, 2020 at 06:36:37PM +0000, Lad Prabhakar wrote: > The mask value was calculated incorrectly for PCIEPAMR register if the > size was less the 128bytes, this patch fixes the above by adding a check > on size. s/less the/less than/ s/128bytes,/128 bytes./ s/this patch fixes the above/Fix this issue/ > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > --- > drivers/pci/controller/pcie-rcar.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c > index d5568db..c76a92a 100644 > --- a/drivers/pci/controller/pcie-rcar.c > +++ b/drivers/pci/controller/pcie-rcar.c > @@ -71,7 +71,7 @@ void rcar_pcie_set_outbound(int win, void __iomem *base, > /* Setup PCIe address space mappings for each resource */ > resource_size_t res_start; > resource_size_t size; > - u32 mask; > + u32 mask = 0x0; > > rcar_pci_write_reg(base, 0x00000000, PCIEPTCTLR(win)); > > @@ -80,7 +80,8 @@ void rcar_pcie_set_outbound(int win, void __iomem *base, > * keeps things pretty simple. > */ > size = resource_size(res); > - mask = (roundup_pow_of_two(size) / SZ_128) - 1; > + if (size > 128) > + mask = (roundup_pow_of_two(size) / SZ_128) - 1; I would put the "mask = 0x0" right here so it's all in one place, i.e., if (size > 128) mask = (roundup_pow_of_two(size) / SZ_128) - 1; else mask = 0x0; > rcar_pci_write_reg(base, mask << 7, PCIEPAMR(win)); > > if (!host) { > -- > 2.7.4 >