Hi Bjorn,
Thank you for the review.
On Wed, Feb 12, 2020 at 2:04 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> On Sat, Feb 08, 2020 at 06:36:37PM +0000, Lad Prabhakar wrote:
> > The mask value was calculated incorrectly for PCIEPAMR register if the
> > size was less the 128bytes, this patch fixes the above by adding a check
> > on size.
>
> s/less the/less than/
> s/128bytes,/128 bytes./
> s/this patch fixes the above/Fix this issue/
>
My bad will fix that.
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > drivers/pci/controller/pcie-rcar.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
> > index d5568db..c76a92a 100644
> > --- a/drivers/pci/controller/pcie-rcar.c
> > +++ b/drivers/pci/controller/pcie-rcar.c
> > @@ -71,7 +71,7 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
> > /* Setup PCIe address space mappings for each resource */
> > resource_size_t res_start;
> > resource_size_t size;
> > - u32 mask;
> > + u32 mask = 0x0;
> >
> > rcar_pci_write_reg(base, 0x00000000, PCIEPTCTLR(win));
> >
> > @@ -80,7 +80,8 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
> > * keeps things pretty simple.
> > */
> > size = resource_size(res);
> > - mask = (roundup_pow_of_two(size) / SZ_128) - 1;
> > + if (size > 128)
> > + mask = (roundup_pow_of_two(size) / SZ_128) - 1;
>
> I would put the "mask = 0x0" right here so it's all in one place,
> i.e.,
>
> if (size > 128)
> mask = (roundup_pow_of_two(size) / SZ_128) - 1;
> else
> mask = 0x0;
>
Sure will change that.
Cheers,
--Prabhakar Lad
> > rcar_pci_write_reg(base, mask << 7, PCIEPAMR(win));
> >
> > if (!host) {
> > --
> > 2.7.4
> >
