We created new bindings for the ARM Board using YAML
so delete the old human-parseable-only bindings.
Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../devicetree/bindings/arm/arm-boards | 237 ------------------
.../devicetree/bindings/arm/vexpress.txt | 229 -----------------
2 files changed, 466 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/arm-boards
delete mode 100644 Documentation/devicetree/bindings/arm/vexpress.txt
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
deleted file mode 100644
index 96b1dad58253..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ /dev/null
@@ -1,237 +0,0 @@
-ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform)
------------------------------------------------------------------------------
-ARM's oldest Linux-supported platform with connectors for different core
-tiles of ARMv4, ARMv5 and ARMv6 type.
-
-Required properties (in root node):
- compatible = "arm,integrator-ap"; /* Application Platform */
- compatible = "arm,integrator-cp"; /* Compact Platform */
-
-FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
-
-Required nodes:
-
-- core-module: the root node to the Integrator platforms must have
- a core-module with regs and the compatible string
- "arm,core-module-integrator"
-- external-bus-interface: the root node to the Integrator platforms
- must have an external bus interface with regs and the
- compatible-string "arm,external-bus-interface"
-
- Required properties for the core module:
- - regs: the location and size of the core module registers, one
- range of 0x200 bytes.
-
-- syscon: the root node of the Integrator platforms must have a
- system controller node pointing to the control registers,
- with the compatible string
- "arm,integrator-ap-syscon"
- "arm,integrator-cp-syscon"
- respectively.
-
- Required properties for the system controller:
- - regs: the location and size of the system controller registers,
- one range of 0x100 bytes.
-
- Required properties for the AP system controller:
- - interrupts: the AP syscon node must include the logical module
- interrupts, stated in order of module instance <module 0>,
- <module 1>, <module 2> ... for the CP system controller this
- is not required not of any use.
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
- model = "ARM Integrator/AP";
- compatible = "arm,integrator-ap";
-
- core-module@10000000 {
- compatible = "arm,core-module-integrator";
- reg = <0x10000000 0x200>;
- };
-
- ebi@12000000 {
- compatible = "arm,external-bus-interface";
- reg = <0x12000000 0x100>;
- };
-
- syscon {
- compatible = "arm,integrator-ap-syscon";
- reg = <0x11000000 0x100>;
- interrupt-parent = <&pic>;
- /* These are the logic module IRQs */
- interrupts = <9>, <10>, <11>, <12>;
- };
-};
-
-
-ARM Versatile Application and Platform Baseboards
--------------------------------------------------
-ARM's development hardware platform with connectors for customizable
-core tiles. The hardware configuration of the Versatile boards is
-highly customizable.
-
-Required properties (in root node):
- compatible = "arm,versatile-ab"; /* Application baseboard */
- compatible = "arm,versatile-pb"; /* Platform baseboard */
-
-Interrupt controllers:
-- VIC required properties:
- compatible = "arm,versatile-vic";
- interrupt-controller;
- #interrupt-cells = <1>;
-
-- SIC required properties:
- compatible = "arm,versatile-sic";
- interrupt-controller;
- #interrupt-cells = <1>;
-
-Required nodes:
-
-- core-module: the root node to the Versatile platforms must have
- a core-module with regs and the compatible strings
- "arm,core-module-versatile", "syscon"
-
-Optional nodes:
-
-- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
- board mounted, this has a separate system controller that is
- defined in this node.
- Required properties:
- compatible = "arm,versatile-ib2-syscon", "syscon"
-
-ARM RealView Boards
--------------------
-The RealView boards cover tailored evaluation boards that are used to explore
-the ARM11 and Cortex A-8 and Cortex A-9 processors.
-
-Required properties (in root node):
- /* RealView Emulation Baseboard */
- compatible = "arm,realview-eb";
- /* RealView Platform Baseboard for ARM1176JZF-S */
- compatible = "arm,realview-pb1176";
- /* RealView Platform Baseboard for ARM11 MPCore */
- compatible = "arm,realview-pb11mp";
- /* RealView Platform Baseboard for Cortex A-8 */
- compatible = "arm,realview-pba8";
- /* RealView Platform Baseboard Explore for Cortex A-9 */
- compatible = "arm,realview-pbx";
-
-Required nodes:
-
-- soc: some node of the RealView platforms must be the SoC
- node that contain the SoC-specific devices, with the compatible
- string set to one of these tuples:
- "arm,realview-eb-soc", "simple-bus"
- "arm,realview-pb1176-soc", "simple-bus"
- "arm,realview-pb11mp-soc", "simple-bus"
- "arm,realview-pba8-soc", "simple-bus"
- "arm,realview-pbx-soc", "simple-bus"
-
-- syscon: some subnode of the RealView SoC node must be a
- system controller node pointing to the control registers,
- with the compatible string set to one of these:
- "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon"
- "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon"
- "arm,realview-eb-syscon", "syscon"
- "arm,realview-pb1176-syscon", "syscon"
- "arm,realview-pb11mp-syscon", "syscon"
- "arm,realview-pba8-syscon", "syscon"
- "arm,realview-pbx-syscon", "syscon"
-
- Required properties for the system controller:
- - regs: the location and size of the system controller registers,
- one range of 0x1000 bytes.
-
-Example:
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "ARM RealView PB1176 with device tree";
- compatible = "arm,realview-pb1176";
- #address-cells = <1>;
- #size-cells = <1>;
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "arm,realview-pb1176-soc", "simple-bus";
- ranges;
-
- syscon: syscon@10000000 {
- compatible = "arm,realview-syscon", "syscon";
- reg = <0x10000000 0x1000>;
- };
-
- };
-};
-
-ARM Versatile Express Boards
------------------------------
-For details on the device tree bindings for ARM Versatile Express boards
-please consult the vexpress.txt file in the same directory as this file.
-
-ARM Juno Boards
-----------------
-The Juno boards are targeting development for AArch64 systems. The first
-iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
-with the second iteration, Juno r1, mainly aimed at development of PCIe
-based systems. Juno r1 also has support for AXI masters placed on the TLX
-connectors to join the coherency domain.
-
-Juno boards are described in a similar way to ARM Versatile Express boards,
-with the motherboard part of the hardware being described in a separate file
-to highlight the fact that is part of the support infrastructure for the SoC.
-Juno device tree bindings also share the Versatile Express bindings as
-described under the RS1 memory mapping.
-
-Required properties (in root node):
- compatible = "arm,juno"; /* For Juno r0 board */
- compatible = "arm,juno-r1"; /* For Juno r1 board */
- compatible = "arm,juno-r2"; /* For Juno r2 board */
-
-Required nodes:
-The description for the board must include:
- - a "psci" node describing the boot method used for the secondary CPUs.
- A detailed description of the bindings used for "psci" nodes is present
- in the psci.yaml file.
- - a "cpus" node describing the available cores and their associated
- "enable-method"s. For more details see cpus.yaml file.
-
-Example:
-
-/dts-v1/;
-/ {
- model = "ARM Juno development board (r0)";
- compatible = "arm,juno", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- A57_0: cpu@0 {
- compatible = "arm,cortex-a57";
- reg = <0x0 0x0>;
- device_type = "cpu";
- enable-method = "psci";
- };
-
- .....
-
- A53_0: cpu@100 {
- compatible = "arm,cortex-a53";
- reg = <0x0 0x100>;
- device_type = "cpu";
- enable-method = "psci";
- };
-
- .....
- };
-
-};
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
deleted file mode 100644
index 39844cd0bcce..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ /dev/null
@@ -1,229 +0,0 @@
-ARM Versatile Express boards family
------------------------------------
-
-ARM's Versatile Express platform consists of a motherboard and one
-or more daughterboards (tiles). The motherboard provides a set of
-peripherals. Processor and RAM "live" on the tiles.
-
-The motherboard and each core tile should be described by a separate
-Device Tree source file, with the tile's description including
-the motherboard file using a /include/ directive. As the motherboard
-can be initialized in one of two different configurations ("memory
-maps"), care must be taken to include the correct one.
-
-
-Root node
----------
-
-Required properties in the root node:
-- compatible value:
- compatible = "arm,vexpress,<model>", "arm,vexpress";
- where <model> is the full tile model name (as used in the tile's
- Technical Reference Manual), eg.:
- - for Coretile Express A5x2 (V2P-CA5s):
- compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
- - for Coretile Express A9x4 (V2P-CA9):
- compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
- If a tile comes in several variants or can be used in more then one
- configuration, the compatible value should be:
- compatible = "arm,vexpress,<model>,<variant>", \
- "arm,vexpress,<model>", "arm,vexpress";
- eg:
- - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
- compatible = "arm,vexpress,v2p-ca15,tc1", \
- "arm,vexpress,v2p-ca15", "arm,vexpress";
- - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
- compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
- "arm,vexpress,v2f-2xv6", "arm,vexpress";
-
-Optional properties in the root node:
-- tile model name (use name from the tile's Technical Reference
- Manual, eg. "V2P-CA5s")
- model = "<model>";
-- tile's HBI number (unique ARM's board model ID, visible on the
- PCB's silkscreen) in hexadecimal transcription:
- arm,hbi = <0xhbi>
- eg:
- - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
- arm,hbi = <0x191>;
- - Coretile Express A9x4 (V2P-CA9) HBI-0225:
- arm,hbi = <0x225>;
-
-
-CPU nodes
----------
-
-Top-level standard "cpus" node is required. It must contain a node
-with device_type = "cpu" property for every available core, eg.:
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <0>;
- };
- };
-
-
-Configuration infrastructure
-----------------------------
-
-The platform has an elaborated configuration system, consisting of
-microcontrollers residing on the mother- and daughterboards known
-as Motherboard/Daughterboard Configuration Controller (MCC and DCC).
-The controllers are responsible for the platform initialization
-(reset generation, flash programming, FPGA bitfiles loading etc.)
-but also control clock generators, voltage regulators, gather
-environmental data like temperature, power consumption etc. Even
-the video output switch (FPGA) is controlled that way.
-
-The controllers are not mapped into normal memory address space
-and must be accessed through bridges - other devices capable
-of generating transactions on the configuration bus.
-
-The nodes describing configuration controllers must define
-the following properties:
-- compatible value:
- compatible = "arm,vexpress,config-bus";
-- bridge phandle:
- arm,vexpress,config-bridge = <phandle>;
-and children describing available functions.
-
-
-Platform topology
------------------
-
-As Versatile Express can be configured in number of physically
-different setups, the device tree should describe platform topology.
-Root node and main motherboard node must define the following
-property, describing physical location of the children nodes:
-- site number:
- arm,vexpress,site = <number>;
- where 0 means motherboard, 1 or 2 are daugtherboard sites,
- 0xf means "master" site (site containing main CPU tile)
-- when daughterboards are stacked on one site, their position
- in the stack be be described with:
- arm,vexpress,position = <number>;
-- when describing tiles consisting more than one DCC, its number
- can be described with:
- arm,vexpress,dcc = <number>;
-
-Any of the numbers above defaults to zero if not defined in
-the node or any of its parent.
-
-
-Motherboard
------------
-
-The motherboard description file provides a single "motherboard" node
-using 2 address cells corresponding to the Static Memory Bus used
-between the motherboard and the tile. The first cell defines the Chip
-Select (CS) line number, the second cell address offset within the CS.
-All interrupt lines between the motherboard and the tile are active
-high and are described using single cell.
-
-Optional properties of the "motherboard" node:
-- motherboard's memory map variant:
- arm,v2m-memory-map = "<name>";
- where name is one of:
- - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
- referred to as "ARM Cortex-A Series memory map":
- arm,v2m-memory-map = "rs1";
- When this property is missing, the motherboard is using the original
- memory map (also known as the "Legacy memory map", primarily used
- with the original CoreTile Express A9x4) with peripherals on CS7.
-
-Motherboard .dtsi files provide a set of labelled peripherals that
-can be used to obtain required phandle in the tile's "aliases" node:
-- UARTs, note that the numbers correspond to the physical connectors
- on the motherboard's back panel:
- v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
-- I2C controllers:
- v2m_i2c_dvi and v2m_i2c_pcie
-- SP804 timers:
- v2m_timer01 and v2m_timer23
-
-The tile description should define a "smb" node, describing the
-Static Memory Bus between the tile and motherboard. It must define
-the following properties:
-- "simple-bus" compatible value (to ensure creation of the children)
- compatible = "simple-bus";
-- mapping of the SMB CS/offset addresses into main address space:
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <...>;
-- interrupts mapping:
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <...>;
-
-
-Example of a VE tile description (simplified)
----------------------------------------------
-
-/dts-v1/;
-
-/ {
- model = "V2P-CA5s";
- arm,hbi = <0x225>;
- arm,vexpress,site = <0xf>;
- compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a5";
- reg = <0>;
- };
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x2c001000 0x1000>,
- <0x2c000100 0x100>;
- };
-
- dcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- osc@0 {
- compatible = "arm,vexpress-osc";
- };
- };
-
- smb {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- /* CS0 is visible at 0x08000000 */
- ranges = <0 0 0x08000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- /* Active high IRQ 0 is connected to GIC's SPI0 */
- interrupt-map = <0 0 0 &gic 0 0 4>;
-
- /include/ "vexpress-v2m-rs1.dtsi"
- };
-};
-
--
2.23.0
