> > >> The PRCM (Power/Reset/Clock Management) block exposes several subdevices > > >> in different subsystems (clk, reset ...) > > >> > > >> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks) > > >> and reset controller subdevices. > > >> > > >> Other subdevices might be added later (if needed). > > >> > > >> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> > > >> --- > > >> drivers/mfd/Kconfig | 8 +++ > > >> drivers/mfd/Makefile | 1 + > > >> drivers/mfd/sun6i-prcm.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++ > > >> 3 files changed, 160 insertions(+) > > >> create mode 100644 drivers/mfd/sun6i-prcm.c > > > [...] > > > > > >> +#include <linux/module.h> > > >> +#include <linux/kernel.h> > > >> +#include <linux/errno.h> > > >> +#include <linux/err.h> > > >> +#include <linux/spinlock.h> > > >> +#include <linux/io.h> > > >> +#include <linux/slab.h> > > >> +#include <linux/mutex.h> > > >> +#include <linux/completion.h> > > >> +#include <linux/irq.h> > > >> +#include <linux/jiffies.h> > > >> +#include <linux/bitops.h> > > >> +#include <linux/fs.h> > > >> +#include <linux/of.h> > > >> +#include <linux/of_irq.h> > > >> +#include <linux/platform_device.h> > > >> +#include <linux/uaccess.h> > > >> +#include <linux/mfd/core.h> > > > I'm pretty sure you don't need half of these. Please only add the > > > ones you make use of. > > > > Sure (this is what happens when you copy/paste from another driver :-)) > > Also, alphabetic order would be nice. No, please don't do that, it's a waste of time. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
