Sricharan R <r.sricharan@xxxxxx> wrote on Wed [2014-May-07 17:46:36 +0530]: > Some socs have a large number of interrupts requests to service > the needs of its many peripherals and subsystems. All of the interrupt > requests lines from the subsystems are not needed at the same > time, so they have to be muxed to the controllers appropriately. > In such places a interrupt controllers are preceded by an > IRQ CROSSBAR that provides flexibility in muxing the device interrupt > requests to the controller inputs. > > The dts file update to support the crossbar device and convert > peripheral irq numbers to crossbar number are added here. > > This is a rebase on top of 3.15-rc4 > > This series depends on crossbar-driver-fixes sent below > http://marc.info/?l=linux-omap&m=139929963420299&w=2 > > [V6] Reordered patch 3 to patch 1 and > squashed patch 2 and 3 from V5 in to patch 2 > > Sricharan R (2): > arm: dts: dra7: Add routable-irqs property for gic node > arm: dts: dra7: Add crossbar device binding > Just for thoroughness I dropped the previous 3 patch series from my build and replaced with this two patch series. Everything still works with my test setup so I consider these patches good. Darren -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
