Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt requests lines from the subsystems are not needed at the same time, so they have to be muxed to the controllers appropriately. In such places a interrupt controllers are preceded by an IRQ CROSSBAR that provides flexibility in muxing the device interrupt requests to the controller inputs. The dts file update to support the crossbar device and convert peripheral irq numbers to crossbar number are added here. This is a rebase on top of 3.15-rc4 This series depends on crossbar-driver-fixes sent below http://marc.info/?l=linux-omap&m=139929963420299&w=2 [V6] Reordered patch 3 to patch 1 and squashed patch 2 and 3 from V5 in to patch 2 Sricharan R (2): arm: dts: dra7: Add routable-irqs property for gic node arm: dts: dra7: Add crossbar device binding arch/arm/boot/dts/dra7.dtsi | 109 +++++++++++++++++++++++++------------------ 1 file changed, 63 insertions(+), 46 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
