[PATCH v2 2/2] arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer

[Martin Kepplinger <martin.kepplinger@xxxxxxx>]

From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>

The LSM9DS1 uses a high level interrupt.

Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 379510886e3e..b025b9a73e5e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -430,7 +430,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_imu>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
 	};
-- 
2.20.1