Re: [PATCH 1/4] dt-bindings: pci: add bindings for brcmstb's PCIe device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-11-07 at 10:32 +0000, Andrew Murray wrote:
> On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> > From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> 
> Nit: Looking at past git history, ideally the patch subject would be
> 'dt-bindings: *PCI*: *A*dd bindings for brcmstb's PCIe.

Noted.

> > The DT bindings description of the brcmstb PCIe device is described.
> > This node can only be used for now on the Raspberry Pi 4.
> > 
> > This was based on Jim's original submission[1], converted to yaml and
> > adapted to the RPi4 case.
> 
> Thanks for picking this up.
> 
> > [1] https://patchwork.kernel.org/patch/10605937/
> > 
> > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> > ---
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
> >  1 file changed, 116 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > new file mode 100644
> > index 000000000000..0b81c26f8568
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -0,0 +1,116 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Brcmstb PCIe Host Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: PCIe host controller
> > +      - description: builtin MSI controller
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: pcie
> > +      - const: msi
> > +
> > +  "#address-cells":
> > +    const: 3
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +  "#interrupt-cells":
> > +    const: 1
> > +
> > +  interrupt-map-mask: true
> > +
> > +  interrupt-map: true
> > +
> > +  ranges: true
> > +
> > +  dma-ranges: true
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sw_pcie
> > +
> > +  msi-controller:	/* We use the domain number as our controller number */
> > 	pcie->id = of_get_pci_domain_nr(dn);
> > 	if (pcie->id < 0)
> > 		return pcie->id;
> > +    description: Identifies the node as an MSI controller.
> > +    type: boolean
> > +
> > +  msi-parent:
> > +    description: MSI controller the device is capable of using.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  linux,pci-domain:
> > +    description: PCI domain ID. Should be unique for each host controller.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  brcm,enable-ssc:
> > +    description: Indicates usage of spread-spectrum clocking.
> > +    type: boolean
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - "#interrupt-cells"
> > +  - interrupt-map-mask
> > +  - interrupt-map
> > +  - ranges
> > +  - dma-ranges
> > +  - linux,pci-domain
> 
> I don't think pci-domain is *required* is it?

You're right, I missed that one. It was needed on some of the STB devices but
not in the RPi4's case. I'll remove it in v2.

Regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux