From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx> The DT bindings description of the brcmstb PCIe device is described. This node can only be used for now on the Raspberry Pi 4. This was based on Jim's original submission[1], converted to yaml and adapted to the RPi4 case. [1] https://patchwork.kernel.org/patch/10605937/ Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> --- .../bindings/pci/brcm,stb-pcie.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..0b81c26f8568 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + "#address-cells": + const: 3 + + "#size-cells": + const: 2 + + "#interrupt-cells": + const: 1 + + interrupt-map-mask: true + + interrupt-map: true + + ranges: true + + dma-ranges: true + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + type: boolean + + msi-parent: + description: MSI controller the device is capable of using. + $ref: /schemas/types.yaml#/definitions/phandle + + linux,pci-domain: + description: PCI domain ID. Should be unique for each host controller. + $ref: /schemas/types.yaml#/definitions/uint32 + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - ranges + - dma-ranges + - linux,pci-domain + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + linux,pci-domain = <0>; + brcm,enable-ssc; + }; + }; -- 2.23.0
