update register descriptions and add an example binding using it.
Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx>
---
.../devicetree/bindings/mtd/mtk-quadspi.txt | 21 ++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index a12e3b5c495d..4860f6e96f5a 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -12,7 +12,10 @@ Required properties:
"mediatek,mt7623-nor", "mediatek,mt8173-nor"
"mediatek,mt7629-nor", "mediatek,mt8173-nor"
"mediatek,mt8173-nor"
-- reg: physical base address and length of the controller's register
+- reg: Contains one or two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and length
+ of the controller register set. The optional second entry is the address
+ and length of the area where the nor flash is mapped to.
- clocks: the phandle of the clocks needed by the nor controller
- clock-names: the names of the clocks
the clocks should be named "spi" and "sf". "spi" is used for spi bus,
@@ -48,3 +51,19 @@ nor_flash: spi@1100d000 {
};
};
+nor_flash: spi@11014000 {
+ compatible = "mediatek,mt7629-nor",
+ "mediatek,mt8173-nor";
+ reg = <0x11014000 0xe0>,
+ <0x30000000 0x10000000>;
+ clocks = <&pericfg CLK_PERI_FLASH_PD>,
+ <&topckgen CLK_TOP_FLASH_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
--
2.21.0
