In an effort to repurpose lvds-encoder.c to also serve the function of LVDS decoders, we ended up defining a new "generic" compatible string, therefore adapt the dt-bindings to fit the new purpose. Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> --- .../bindings/display/bridge/lvds-codec.txt | 100 +++++++++++++++++++++ .../bindings/display/bridge/lvds-transmitter.txt | 66 -------------- 2 files changed, 100 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.txt delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt new file mode 100644 index 0000000..45fd81c --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.txt @@ -0,0 +1,100 @@ +Trasnparent LVDS encoders and LVDS decoders +------------------------------------------- + +This binding supports transparent LVDS encoders and LVDS decoders that don't +require any configuration. + +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple +incompatible data link layers have been used over time to transmit image data +to LVDS panels. This binding targets devices compatible with the following +specifications only. + +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National +Semiconductor +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video +Electronics Standards Association (VESA) + +Those devices have been marketed under the FPD-Link and FlatLink brand names +among others. + + +Required properties: + +- compatible: Must be "lvds-encoder" for LVDS encoders or "lvds-decoder" for + LVDS decoders. + + Any encoder compatible with this generic binding, but with additional + properties not listed here, must list a device specific compatible first + followed by the generic compatible. + +Required nodes: + +This device has two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +For LVDS encoders: +- Video port 0 for parallel input +- Video port 1 for LVDS output + +For LVDS decoders: +- Video port 0 for LVDS input +- Video port 1 for parallel output + + +LVDS encoder example +-------------------- + +lvds-encoder { + compatible = "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; + +LVDS decoder example +-------------------- + +lvds-decoder { + compatible = "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt deleted file mode 100644 index 60091db..0000000 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt +++ /dev/null @@ -1,66 +0,0 @@ -Parallel to LVDS Encoder ------------------------- - -This binding supports the parallel to LVDS encoders that don't require any -configuration. - -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple -incompatible data link layers have been used over time to transmit image data -to LVDS panels. This binding targets devices compatible with the following -specifications only. - -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National -Semiconductor -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video -Electronics Standards Association (VESA) - -Those devices have been marketed under the FPD-Link and FlatLink brand names -among others. - - -Required properties: - -- compatible: Must be "lvds-encoder" - - Any encoder compatible with this generic binding, but with additional - properties not listed here, must list a device specific compatible first - followed by this generic compatible. - -Required nodes: - -This device has two video ports. Their connections are modeled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for parallel input -- Video port 1 for LVDS output - - -Example -------- - -lvds-encoder { - compatible = "lvds-encoder"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&display_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; -}; -- 2.7.4