[PATCH V2 2/2] ASoC: fsl_asrc: Add support for imx8qm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are two asrc module in imx8qm, each module has different
clock configuration, and the DMA type is EDMA.

So in this patch, we define the new clocks, refine the clock map,
and include struct fsl_asrc_soc_data for different soc usage.

The EDMA channel is fixed with each dma request, one dma request
corresponding to one dma channel. So we need to request dma
channel with dma request of asrc module.

Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
Acked-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
Changes in v2
- use !use_edma to wrap code in fsl_asrc_dma
- add Acked-by: Nicolin Chen

 sound/soc/fsl/fsl_asrc.c     | 91 +++++++++++++++++++++++++++++-------
 sound/soc/fsl/fsl_asrc.h     | 65 +++++++++++++++++++++++++-
 sound/soc/fsl/fsl_asrc_dma.c | 42 +++++++++++------
 3 files changed, 166 insertions(+), 32 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index a3cfceea7d2f..9dc5b5a93fb0 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -43,24 +43,55 @@ static struct snd_pcm_hw_constraint_list fsl_asrc_rate_constraints = {
  */
 static unsigned char input_clk_map_imx35[] = {
 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
 };
 
 static unsigned char output_clk_map_imx35[] = {
 	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
 };
 
 /* i.MX53 uses the same map for input and output */
 static unsigned char input_clk_map_imx53[] = {
 /*	0x0  0x1  0x2  0x3  0x4  0x5  0x6  0x7  0x8  0x9  0xa  0xb  0xc  0xd  0xe  0xf */
 	0x0, 0x1, 0x2, 0x7, 0x4, 0x5, 0x6, 0x3, 0x8, 0x9, 0xa, 0xb, 0xc, 0xf, 0xe, 0xd,
+	0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7,
+	0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7,
 };
 
 static unsigned char output_clk_map_imx53[] = {
 /*	0x0  0x1  0x2  0x3  0x4  0x5  0x6  0x7  0x8  0x9  0xa  0xb  0xc  0xd  0xe  0xf */
 	0x8, 0x9, 0xa, 0x7, 0xc, 0x5, 0x6, 0xb, 0x0, 0x1, 0x2, 0x3, 0x4, 0xf, 0xe, 0xd,
+	0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7,
+	0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7,
 };
 
-static unsigned char *clk_map[2];
+/* i.MX8QM uses the same map for input and output */
+static unsigned char input_clk_map_imx8_0[] = {
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
+	0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+};
+
+static unsigned char output_clk_map_imx8_0[] = {
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
+	0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+};
+
+static unsigned char input_clk_map_imx8_1[] = {
+	0xf, 0xf, 0xf, 0xf, 0xf, 0x7, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
+	0x0, 0x1, 0x2, 0x3, 0xb, 0xc, 0xf, 0xf, 0xd, 0xe, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+	0x4, 0x5, 0x6, 0xf, 0x8, 0x9, 0xa, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+};
+
+static unsigned char output_clk_map_imx8_1[] = {
+	0xf, 0xf, 0xf, 0xf, 0xf, 0x7, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
+	0x0, 0x1, 0x2, 0x3, 0xb, 0xc, 0xf, 0xf, 0xd, 0xe, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+	0x4, 0x5, 0x6, 0xf, 0x8, 0x9, 0xa, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
+};
 
 /**
  * Select the pre-processing and post-processing options
@@ -353,8 +384,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	}
 
 	/* Validate input and output clock sources */
-	clk_index[IN] = clk_map[IN][config->inclk];
-	clk_index[OUT] = clk_map[OUT][config->outclk];
+	clk_index[IN] = asrc_priv->soc->inclk_map[config->inclk];
+	clk_index[OUT] = asrc_priv->soc->outclk_map[config->outclk];
 
 	/* We only have output clock for ideal ratio mode */
 	clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]];
@@ -398,13 +429,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	/* Set the channel number */
 	channels = config->channel_num;
 
-	if (asrc_priv->channel_bits < 4)
+	if (asrc_priv->soc->channel_bits < 4)
 		channels /= 2;
 
 	/* Update channels for current pair */
 	regmap_update_bits(asrc_priv->regmap, REG_ASRCNCR,
-			   ASRCNCR_ANCi_MASK(index, asrc_priv->channel_bits),
-			   ASRCNCR_ANCi(index, channels, asrc_priv->channel_bits));
+			   ASRCNCR_ANCi_MASK(index, asrc_priv->soc->channel_bits),
+			   ASRCNCR_ANCi(index, channels, asrc_priv->soc->channel_bits));
 
 	/* Default setting: Automatic selection for processing mode */
 	regmap_update_bits(asrc_priv->regmap, REG_ASRCTR,
@@ -531,7 +562,7 @@ static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream,
 	struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
 
 	/* Odd channel number is not valid for older ASRC (channel_bits==3) */
-	if (asrc_priv->channel_bits == 3)
+	if (asrc_priv->soc->channel_bits == 3)
 		snd_pcm_hw_constraint_step(substream->runtime, 0,
 					   SNDRV_PCM_HW_PARAM_CHANNELS, 2);
 
@@ -964,14 +995,10 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
-		asrc_priv->channel_bits = 3;
-		clk_map[IN] = input_clk_map_imx35;
-		clk_map[OUT] = output_clk_map_imx35;
-	} else {
-		asrc_priv->channel_bits = 4;
-		clk_map[IN] = input_clk_map_imx53;
-		clk_map[OUT] = output_clk_map_imx53;
+	asrc_priv->soc = of_device_get_match_data(&pdev->dev);
+	if (!asrc_priv->soc) {
+		dev_err(&pdev->dev, "failed to get soc data\n");
+		return -ENODEV;
 	}
 
 	ret = fsl_asrc_init(asrc_priv);
@@ -1113,9 +1140,39 @@ static const struct dev_pm_ops fsl_asrc_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(fsl_asrc_suspend, fsl_asrc_resume)
 };
 
+static const struct fsl_asrc_soc_data fsl_asrc_imx35_data = {
+	.use_edma = false,
+	.channel_bits = 3,
+	.inclk_map = input_clk_map_imx35,
+	.outclk_map = output_clk_map_imx35,
+};
+
+static const struct fsl_asrc_soc_data fsl_asrc_imx53_data = {
+	.use_edma = false,
+	.channel_bits = 4,
+	.inclk_map = input_clk_map_imx53,
+	.outclk_map = output_clk_map_imx53,
+};
+
+static const struct fsl_asrc_soc_data fsl_asrc_imx8qm_0_data = {
+	.use_edma = true,
+	.channel_bits = 4,
+	.inclk_map = input_clk_map_imx8_0,
+	.outclk_map = output_clk_map_imx8_0,
+};
+
+static const struct fsl_asrc_soc_data fsl_asrc_imx8qm_1_data = {
+	.use_edma = true,
+	.channel_bits = 4,
+	.inclk_map = input_clk_map_imx8_1,
+	.outclk_map = output_clk_map_imx8_1,
+};
+
 static const struct of_device_id fsl_asrc_ids[] = {
-	{ .compatible = "fsl,imx35-asrc", },
-	{ .compatible = "fsl,imx53-asrc", },
+	{ .compatible = "fsl,imx35-asrc", .data = &fsl_asrc_imx35_data },
+	{ .compatible = "fsl,imx53-asrc", .data = &fsl_asrc_imx53_data },
+	{ .compatible = "fsl,imx8qm-asrc0", .data = &fsl_asrc_imx8qm_0_data },
+	{ .compatible = "fsl,imx8qm-asrc1", .data = &fsl_asrc_imx8qm_1_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_asrc_ids);
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 2b57e8c53728..8decbe670c3e 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -308,6 +308,29 @@ enum asrc_inclk {
 	INCLK_SSI3_TX = 0x0b,
 	INCLK_SPDIF_TX = 0x0c,
 	INCLK_ASRCK1_CLK = 0x0f,
+
+	/* clocks for imx8 */
+	INCLK_AUD_PLL_DIV_CLK0 = 0x10,
+	INCLK_AUD_PLL_DIV_CLK1 = 0x11,
+	INCLK_AUD_CLK0         = 0x12,
+	INCLK_AUD_CLK1         = 0x13,
+	INCLK_ESAI0_RX_CLK     = 0x14,
+	INCLK_ESAI0_TX_CLK     = 0x15,
+	INCLK_SPDIF0_RX        = 0x16,
+	INCLK_SPDIF1_RX        = 0x17,
+	INCLK_SAI0_RX_BCLK     = 0x18,
+	INCLK_SAI0_TX_BCLK     = 0x19,
+	INCLK_SAI1_RX_BCLK     = 0x1a,
+	INCLK_SAI1_TX_BCLK     = 0x1b,
+	INCLK_SAI2_RX_BCLK     = 0x1c,
+	INCLK_SAI3_RX_BCLK     = 0x1d,
+	INCLK_ASRC0_MUX_CLK    = 0x1e,
+
+	INCLK_ESAI1_RX_CLK     = 0x20,
+	INCLK_ESAI1_TX_CLK     = 0x21,
+	INCLK_SAI6_TX_BCLK     = 0x22,
+	INCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
+	INCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
 };
 
 enum asrc_outclk {
@@ -325,6 +348,29 @@ enum asrc_outclk {
 	OUTCLK_SSI3_RX = 0x0b,
 	OUTCLK_SPDIF_RX = 0x0c,
 	OUTCLK_ASRCK1_CLK = 0x0f,
+
+	/* clocks for imx8 */
+	OUTCLK_AUD_PLL_DIV_CLK0 = 0x10,
+	OUTCLK_AUD_PLL_DIV_CLK1 = 0x11,
+	OUTCLK_AUD_CLK0         = 0x12,
+	OUTCLK_AUD_CLK1         = 0x13,
+	OUTCLK_ESAI0_RX_CLK     = 0x14,
+	OUTCLK_ESAI0_TX_CLK     = 0x15,
+	OUTCLK_SPDIF0_RX        = 0x16,
+	OUTCLK_SPDIF1_RX        = 0x17,
+	OUTCLK_SAI0_RX_BCLK     = 0x18,
+	OUTCLK_SAI0_TX_BCLK     = 0x19,
+	OUTCLK_SAI1_RX_BCLK     = 0x1a,
+	OUTCLK_SAI1_TX_BCLK     = 0x1b,
+	OUTCLK_SAI2_RX_BCLK     = 0x1c,
+	OUTCLK_SAI3_RX_BCLK     = 0x1d,
+	OUTCLK_ASRCO_MUX_CLK    = 0x1e,
+
+	OUTCLK_ESAI1_RX_CLK     = 0x20,
+	OUTCLK_ESAI1_TX_CLK     = 0x21,
+	OUTCLK_SAI6_TX_BCLK     = 0x22,
+	OUTCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
+	OUTCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
 };
 
 #define ASRC_CLK_MAX_NUM	16
@@ -387,6 +433,21 @@ struct dma_block {
 	unsigned int length;
 };
 
+/**
+ * fsl_asrc_soc_data: soc specific data
+ *
+ * @use_edma: using edma as dma device or not
+ * @channel_bits: width of ASRCNCR register for each pair
+ * @inclk_map: clock map for input clock
+ * @outclk_map: clock map for output clock
+ */
+struct fsl_asrc_soc_data {
+	bool use_edma;
+	unsigned int channel_bits;
+	unsigned char *inclk_map;
+	unsigned char *outclk_map;
+};
+
 /**
  * fsl_asrc_pair: ASRC Pair private data
  *
@@ -431,7 +492,7 @@ struct fsl_asrc_pair {
  * @asrck_clk: clock sources to driver ASRC internal logic
  * @lock: spin lock for resource protection
  * @pair: pair pointers
- * @channel_bits: width of ASRCNCR register for each pair
+ * @soc: soc specific data
  * @channel_avail: non-occupied channel numbers
  * @asrc_rate: default sample rate for ASoC Back-Ends
  * @asrc_width: default sample width for ASoC Back-Ends
@@ -450,7 +511,7 @@ struct fsl_asrc {
 	spinlock_t lock;
 
 	struct fsl_asrc_pair *pair[ASRC_PAIR_MAX_NUM];
-	unsigned int channel_bits;
+	const struct fsl_asrc_soc_data *soc;
 	unsigned int channel_avail;
 
 	int asrc_rate;
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index d6146de9acd2..f871fdb9d1c6 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -197,21 +197,37 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	dma_cap_set(DMA_SLAVE, mask);
 	dma_cap_set(DMA_CYCLIC, mask);
 
-	/* Get DMA request of Back-End */
-	tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
-	tmp_data = tmp_chan->private;
-	pair->dma_data.dma_request = tmp_data->dma_request;
-	dma_release_channel(tmp_chan);
+	/*
+	 * For EDMA DEV_TO_DEV channel, we don't need to configure
+	 * dma_request and dma_request2, we can get dma channel through
+	 * dma_request_slave_channel directly.
+	 * Compare with SDMA channel, EDMA channel is bound with dma
+	 * request event of each peripheral, and it is fixed. Not like SDMA,
+	 * the channel is allocated dynamically. So when DMA is EDMA, we
+	 * can only get EDMA channel through dma-names of Front-End device.
+	 */
+	if (!asrc_priv->soc->use_edma) {
+		/* Get DMA request of Back-End */
+		tmp_chan = dma_request_slave_channel(dev_be, tx ? "tx" : "rx");
+		tmp_data = tmp_chan->private;
+		pair->dma_data.dma_request = tmp_data->dma_request;
+		dma_release_channel(tmp_chan);
 
-	/* Get DMA request of Front-End */
-	tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
-	tmp_data = tmp_chan->private;
-	pair->dma_data.dma_request2 = tmp_data->dma_request;
-	pair->dma_data.peripheral_type = tmp_data->peripheral_type;
-	pair->dma_data.priority = tmp_data->priority;
-	dma_release_channel(tmp_chan);
+		/* Get DMA request of Front-End */
+		tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+		tmp_data = tmp_chan->private;
+		pair->dma_data.dma_request2 = tmp_data->dma_request;
+		pair->dma_data.peripheral_type = tmp_data->peripheral_type;
+		pair->dma_data.priority = tmp_data->priority;
+		dma_release_channel(tmp_chan);
+
+		pair->dma_chan[dir] =
+			dma_request_channel(mask, filter, &pair->dma_data);
+	} else {
+		pair->dma_chan[dir] =
+			fsl_asrc_get_dma_channel(pair, dir);
+	}
 
-	pair->dma_chan[dir] = dma_request_channel(mask, filter, &pair->dma_data);
 	if (!pair->dma_chan[dir]) {
 		dev_err(dev, "failed to request DMA channel for Back-End\n");
 		return -EINVAL;
-- 
2.21.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux