Re: [PATCH v4 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nabuvannan,

On Wed, Oct 30, 2019 at 03:19:01PM +0530, Manivannan Sadhasivam wrote:
> Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
> add MAINTAINERS entry for the binding and driver.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/media/i2c/imx296.yaml | 94 +++++++++++++++++++
>  MAINTAINERS                                   |  8 ++
>  2 files changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> new file mode 100644
> index 000000000000..c04ec2203268
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> +
> +description: |-
> +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> +  sensor with square pixel array and 1.58 M effective pixels. This chip
> +  features a global shutter with variable charge-integration time. It is
> +  programmable through I2C and 4-wire interfaces. The sensor output is
> +  available via CSI-2 serial data output (1 Lane).
> +
> +properties:
> +  compatible:
> +    const: sony,imx296
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: mclk
> +
> +  clock-frequency:
> +    description:
> +      Frequency of the mclk clock in Hertz.
> +
> +  vddo-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +
> +  vdda-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +  vddd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +    maxItems: 1
> +
> +  port: true

You're missing "type: object" under port.

-- 
Regards,

Sakari Ailus



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux